Low Cost 8W Off-line LED Driver using RT8487

1rem

rt-dark-800

headline-3

false

Application Note Name

false

basicInfoTitle

rt-dark-300

applicationNoteInfo

left

buttonDownload

text-with-icon

secondary

i18n(button-item.download.button-label)

i18n(button-item.download.button-link)

_self

false

btnAllApplicationNote

text-with-icon

secondary

i18n(button-item.all-application-note.button-label)

i18n(button-item.all-application-note.button-link)

_self

false

width

fixed-width

basicInfoSection

withLine

2rem

width

full-width

<div class=WordSection1> <h1>Low Cost 8W Off-line LED Driver using RT8487</h1> <h2 id="__Bookmark__0">Abstract</h2> RT8487 is a boundary mode constant current controller with internal high side driver, which can be used in buck and buck-boost configuration, to provide a constant output current to the (LED) load. It contains special circuitry for achieving high power factor and low input current THD, while minimizing external component count. The small SOT23-6 package keeps application footprint small, and makes RT8487 a cost effective solution for off-line LED drivers. This application note provides details on how to design a cost effective 8W Buck LED driver with RT8487. <h2 id="__Bookmark__1">1. Introduction</h2> Important requirements for low cost off-line LED drivers are high efficiency, good Power Factor with low THDi fulfilling IEC61000 class C, accurate LED current, fast start-up, and simple design using low cost standard components. The following 8W LED driver design with RT8487 in floating buck configuration fulfills all of the above. Key specifications: <ul> <li>Input range 230V +/-15% (with some alterations, the design can be extended to full range input) </li> <li>LED string 27V , I-LED = 300mA +/- 5% , P-out=8W for general retrofit lighting applications</li> <li>THDi < 20% fulfilling IEC61000 class C</li> <li>Start-up time < 300msec</li> <li>Full protections: output short-circuit, LED open circuit, over current and over temperature protection.</li> <li>Key focus on low BOM cost by using transformer-free design with standard low cost components. </li> </ul> <h2 id="__Bookmark__2">2. Application Circuit</h2> The total application of the 8W LED driver is shown below. <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image001_en.jpg" ><img width=609 height=320 id="圖片 1" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image001_en.jpg" alt="Technical Document Image Preview"></a> Figure 1 RT8487 is used in floating controller buck configuration. The complete application circuit is shown in figure 1. The IC controls the switch-on time of the high side MOSFET Q1, and it senses the average LED current via RS which is in series with the buck inductor for true load current sense. Boundary conduction mode switching is obtained by sensing the zero inductor current (also via RS). High efficient resonant switching at minimum drain-source voltage is achieved by programmable switch-on delay from zero current detection point (via R3). A smart algorithm controls the ON time to obtain high input power factor and low THDi. IC bias is provided by a simple bootstrap circuit D2 & C2, thereby eliminating the need for a separate auxiliary winding. This makes it possible to use a simple standard drum coil instead of a more expensive custom wound transformer. Low IC start-up bias current allows the use of high value start-up resistors R1 & R2 while still achieving fast start-up (typically 123msec). The total circuit can be built on a small single-sided PCB measuring 18 x 36mm. <h2 id="__Bookmark__3">3. Calculation of the Key Components</h2> The following sections explain the settings of the various application parameters. Setting Average Output Current The average output current that flows through the LED string is set by an external resistor, RS, which is connected between the IC GND and SENSE terminals. Since RS is connected in series with the inductor, the average LED current can be accurately sensed via this resistor. The relationship between output current, IOUT, and RS is shown below : <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image002_en.png" ><img width=82 height=30 id="圖片 3" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image002_en.png" alt="Technical Document Image Preview"></a> In this application, LED current was defined as 300mA, so <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image003_en.png" ><img width=129 height=30 id="圖片 5" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image003_en.png" alt="Technical Document Image Preview"></a> We select 1Ω//4.7Ω to obtain 0.824Ω Start-up Resistor The start-up resistors (R1+R2) should be chosen such that the current flow through these resistors at minimum line voltage exceeds the IC start-up current. Otherwise, the RT8487 Vcc may never reach the start-up voltage. The typical IC start-up current is 25μA. Start-up resistor should be chosen not to exceed the operating current. Otherwise, the VCC voltage may rise higher than set by the Vcc bootstrap circuit, and could trigger OVP. The typical operating current is 1mA. The value of the start-up resistor together with the VCC capacitor C2 will determine the start-up time, which is defined by: <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image004_en.png" ><img width=109 height=36 id="圖片 9" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image004_en.png" alt="Technical Document Image Preview"></a> where VUVLO is 17V and Istart-up can be approximated by: <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image005_en.png" ><img width=105 height=41 id="圖片 10" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image005_en.png" alt="Technical Document Image Preview"></a> For most applications, C2 can be chosen 1μF. R1 and R2 are chosen 1MΩ each, which gives a typical start-up current of <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image006_en.png" ><img width=140 height=35 id="圖片 15" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image006_en.png" alt="Technical Document Image Preview"></a> The start-up time will become: <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image007_en.png" ><img width=137 height=30 id="圖片 16" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image007_en.png" alt="Technical Document Image Preview"></a> <div class="tb-system"> <table class=MsoNormalTable border=0 cellspacing=0 cellpadding=0 width=678 style='width:508.4pt;border-collapse:collapse'> <tr style='height:222.15pt'> <td width=379 valign=top style='width:284.25pt;padding:.75pt .75pt .75pt .75pt; height:222.15pt'> <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image008_en.jpg" ><img width=346 height=258 id="Picture 8" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image008_en.jpg" alt="Technical Document Image Preview"></a> Figure 2 </td> <td width=299 valign=top style='width:224.15pt;padding:.75pt .75pt .75pt .75pt; height:222.15pt'> Figure 2 shows the IC start-up waveforms at 230V ac input. When AC mains is applied, the current through R1 and R2 will charge C2. When the IC VCC voltage exceeds the UVLO level, the power MOSFET starts switching, quickly charging the output. Total measured start-up time was 150msec. </td> </tr> </table> </div> Input Capacitor Selection For High Power Factor application, the input capacitor C1 should be sufficiently small to achieve rectified line voltage sine-wave. The voltage rating of the input filter capacitor, VCIN, should be large enough to handle the maximum input voltage. A 100nF / 500V film capacitor is a suitable choice. For reducing differential mode EMI, a pi filter can be used by means of two 47nF capacitors and a suitable inductor. Buck Inductor Value Selection Due to Boundary Conduction Mode switching, the buck inductance value will influence the converter switching frequency. For smaller size coil, a small inductance value could be selected, but the limitations are set by the IC minimum ON time (0.5μsec typically) and minimum OFF time (0.5μsec typically). The maximum inductance value is limited by the IC maximum ON time (15μsec typically) and maximum OFF time (33μsec typically). To calculate the inductance, we first need to calculate the maximum peak current (Ipeak) at the top of the rectified sine wave (Vpeak) : <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image009_en.png" ><img width=114 height=42 id="圖片 18" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image009_en.png" alt="Technical Document Image Preview"></a> where Pin is the converter input power, a is the ratio of LED voltage versus BUCK input voltage: <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image010_en.png" ><img width=49 height=32 id="圖片 19" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image010_en.png" alt="Technical Document Image Preview"></a> and F(K(a)) is a complex function to achieve low THD for PFC buck: <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image011_en.png" ><img width=509 height=30 id="圖片 20" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image011_en.png" alt="Technical Document Image Preview"></a> <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image012_en.jpg" ><img width=355 height=289 id="Picture 9" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image012_en.jpg" alt="Technical Document Image Preview"></a> Figure 3 In the 8W application, Pin can be calculated from <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image013_en.png" ><img width=139 height=30 id="圖片 21" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image013_en.png" alt="Technical Document Image Preview"></a> (efficiency was estimated at 86%) The factor a can be calculated at the peak of the rectified sine wave: <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image014_en.png" ><img width=108 height=34 id="圖片 22" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image014_en.png" alt="Technical Document Image Preview"></a> From Figure 3 or formula (1) we can derive,<a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image015_en.png" ><img width=273 height=35 id="圖片 26" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image015_en.png" alt="Technical Document Image Preview"></a> The range of inductance can now be calculated from: <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image016_en.png" ><img width=200 height=37 id="圖片 27" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image016_en.png" alt="Technical Document Image Preview"></a> L1 was chosen 330μH with current rating 1.2A to achieve best compromise between size, cost and efficiency. The frequency at the top of the sine wave can be calculated: <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image017_en.png" ><img width=123 height=31 id="圖片 28" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image017_en.png" alt="Technical Document Image Preview"></a> (Tdelay is determined by the resistor connected to AND pin, see next section) Setting the switch-on delay time After the inductor current has reached zero, a resonance will occur between the inductor and the total capacitance at the switch node, which is mainly determined by the MOSFET drain-source capacitance. In order to minimize the MOSFET switching losses, RT8487 provides the flexibility to adjust the delay time of next switch-on cycle in order to switch-on at the maximum point of the resonance, which corresponds to the minimum drain-source voltage value. <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image018_en.jpg" ><img width=430 height=299 id="Picture 13" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image018_en.jpg" alt="Technical Document Image Preview"></a> Figure 4 The delay time from zero current point to the maximum of the switch resonance (Tdelay in figure 4) which can be calculated from: <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image019_en.png" ><img width=164 height=24 src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image019_en.png" alt="Technical Document Image Preview"></a> where CSW is the capacitance at the switch node, mostly determined by the MOSFET drain-source capacitance, which in this application equals 38pF. The resonance delay becomes: <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image020_en.png" ><img width=284 height=24 src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image020_en.png" alt="Technical Document Image Preview"></a> The total required delay time for optimal resonant switching needs to be chosen a bit larger to include zero current detection delay (around 290nsec in this case). So total delay time becomes 290nsec + 352nsec = 642nsec. The delay time <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image021_en.png" ><img width=39 height=24 src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image021_en.png" alt="Technical Document Image Preview"></a> from zero current detection point to next MOSFET switch-on cycle can be adjusted by the resistor value R3 connected between AND pin and IC GND <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image022_en.png" ><img width=304 height=27 id="圖片 29" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image022_en.png" alt="Technical Document Image Preview"></a> ·<a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image023_en.png" ><img width=29 height=24 src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image023_en.png" alt="Technical Document Image Preview"></a>= approximate total delay time in μsec ·R3 resister value in kΩ The final value for R3 was set at 68kΩ. Figure 5 below shows the switching waveform with optimal resonant switch-on point. <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image024_en.jpg" ><img width=394 height=294 id="Picture 6" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image024_en.jpg" alt="Technical Document Image Preview"></a> Figure 5 MOSFET Selection The MOSFET voltage rating should be sufficient to handle the max line input voltage peak value + margin for line transients. A MOSFET with minimum 500V drain-source rating is recommended. The MOSFET current rating depends on thermal aspects. A 2A MOSFET was selected for low dissipation and better efficiency. Forward Diode Selection When the power MOSFET turns off, the path for the current is through the diode connected between the switch output and ground. This forward biased diode must have low forward voltage drop and fast recovery times. The reverse voltage rating of the diode is should be greater than the maximum input peak voltage + margin and the current rating should be greater than the inductor peak current. A fast 600V / 2A diode was selected for low dissipation and better efficiency. Output Capacitor Selection To achieve high power factor and low THDi, the inductor current contains considerable low frequency ripple. The output capacitor will filter the switching and low frequency ripple current to deliver a low ripple voltage to the LED string. The amount of output ripple voltage together with the differential resistance of the LED string will determine the ripple current through the LEDs. In this low cost design, a 220μF capacitor was chosen, which gives around 330mApp ripple current through the LED string. To reduce this ripple, a larger value output capacitor is required. <h2 id="__Bookmark__4">4. Key Performance Measurements</h2> Figure 6 shows the input and output voltage and current waveforms. Input AC waveform shows good PFC and low THD. The average output LED current is accurately set at 299mA. <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image025_en.jpg" ><img width=604 height=245 id="Picture 14" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image025_en.jpg" alt="Technical Document Image Preview"></a> Figure 6 Figure 7 below shows the switching waveforms. To achieve low THDi, the current peak value is around 4x higher than the average current. The single switching cycle shows fully BCM switching with minimum drain-source voltage switch-on. <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image026_en.jpg" ><img width=602 height=255 id="Picture 17" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image026_en.jpg" alt="Technical Document Image Preview"></a> Figure 7 Below table shows the key performance parameters. Typical efficiency is 86% with excellent LED current stability over mains voltage and low THD fulfilling IEC61000 class C. <div> <table class=MsoNormalTable border=1 cellspacing=0 cellpadding=0 width=600 style='width:450.0pt;border-collapse:collapse;border:none'> <tr> <td width=60 style='width:45.0pt;border:solid #009EB8 1.0pt;background:#009EB8; padding:.75pt .75pt .75pt .75pt'> Vin ac </td> <td width=60 style='width:45.0pt;border:solid #009EB8 1.0pt;border-left:none; background:#009EB8;padding:.75pt .75pt .75pt .75pt'> Pin ac </td> <td width=60 style='width:45.0pt;border:solid #009EB8 1.0pt;border-left:none; background:#009EB8;padding:.75pt .75pt .75pt .75pt'> PF </td> <td width=60 style='width:45.0pt;border:solid #009EB8 1.0pt;border-left:none; background:#009EB8;padding:.75pt .75pt .75pt .75pt'> THD </td> <td width=95 style='width:71.25pt;border:solid #009EB8 1.0pt;border-left: none;background:#009EB8;padding:.75pt .75pt .75pt .75pt'> V-LED </td> <td width=60 style='width:45.0pt;border:solid #009EB8 1.0pt;border-left:none; background:#009EB8;padding:.75pt .75pt .75pt .75pt'> I-LED </td> <td width=95 style='width:71.25pt;border:solid #009EB8 1.0pt;border-left: none;background:#009EB8;padding:.75pt .75pt .75pt .75pt'> Pout </td> <td width=60 style='width:45.0pt;border:solid #009EB8 1.0pt;border-left:none; background:#009EB8;padding:.75pt .75pt .75pt .75pt'> Efficiency </td> <td width=60 style='width:45.0pt;border:solid #009EB8 1.0pt;border-left:none; background:#009EB8;padding:.75pt .75pt .75pt .75pt'> Ploss </td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 195.5 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 9.59 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 0.96 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 11.6 </td> <td width=95 style='width:71.25pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 27.69 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 0.299 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 8.279 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 86.3% </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1.31 </td> </tr> <tr style='height:13.5pt'> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt; height:13.5pt'> 231.8 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt;height:13.5pt'> 9.64 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt;height:13.5pt'> 0.94 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt;height:13.5pt'> 13.3 </td> <td width=95 style='width:71.25pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt;height:13.5pt'> 27.74 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt;height:13.5pt'> 0.299 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt;height:13.5pt'> 8.294 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt;height:13.5pt'> 86.0% </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt;height:13.5pt'> 1.35 </td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 264.2 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 9.68 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 0.90 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 17.7 </td> <td width=95 style='width:71.25pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 27.68 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 0.300 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 8.304 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 85.8% </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1.38 </td> </tr> </table> </div> <h2 id="__Bookmark__5">5. Total Bill of Materials</h2> The total BOM of the 8W LED driver is shown below: <div> <table class=MsoNormalTable border=1 cellspacing=0 cellpadding=0 width=600 style='width:450.0pt;border-collapse:collapse;border:none'> <tr> <td width=62 style='width:46.25pt;border:solid #009EB8 1.0pt;background:#009EB8; padding:.75pt .75pt .75pt .75pt'> Item </td> <td width=62 style='width:46.2pt;border:solid #009EB8 1.0pt;border-left:none; background:#009EB8;padding:.75pt .75pt .75pt .75pt'> Quantity </td> <td width=92 style='width:68.85pt;border:solid #009EB8 1.0pt;border-left: none;background:#009EB8;padding:.75pt .75pt .75pt .75pt'> Reference </td> <td width=142 style='width:106.8pt;border:solid #009EB8 1.0pt;border-left: none;background:#009EB8;padding:.75pt .75pt .75pt .75pt'> Part / Value </td> <td width=99 style='width:73.95pt;border:solid #009EB8 1.0pt;border-left: none;background:#009EB8;padding:.75pt .75pt .75pt .75pt'> Footprint </td> <td width=144 style='width:107.95pt;border:solid #009EB8 1.0pt;border-left: none;background:#009EB8;padding:.75pt .75pt .75pt .75pt'> Remark </td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> F1 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 1A/250V </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> --- </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> Fuse 1A </td> </tr> <tr style='height:13.5pt'> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt; height:13.5pt'> 2 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt;height:13.5pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt;height:13.5pt'> LX1 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt;height:13.5pt'> 4.7mH (DR0612) </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt;height:13.5pt'> DR0612 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt;height:13.5pt'> EMI drum coil </td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 3 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> L1 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 330μH (CKPK1012) </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> DR1012 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> Buck drum coil </td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 4 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> CX1 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 0.1μF/275Vac </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> DIP </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> X-capacitor </td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 5 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> C1 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 0.1μF/450V </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> DIP </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> MPP Cap </td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 6 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> C2 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 1μF/50V </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1206 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'></td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 7 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> C3 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 0.1μF/50V </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 0603 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'></td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 8 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> C4 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 1nF/50V </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 0603 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'></td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 9 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> EC1 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 220μF/35V </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> DIP </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> Output E-cap </td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 10 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> RX1 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 10K </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1206 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'></td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 11 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 2 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> R1, R2 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 1M </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1206 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'></td> </tr> <tr style='height:13.5pt'> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt; height:13.5pt'> 12 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt;height:13.5pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt;height:13.5pt'> R3 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt;height:13.5pt'> 68K </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt;height:13.5pt'> 0603 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt;height:13.5pt'></td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 13 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> R4 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 10R </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 0805 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'></td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 14 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> R5 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 100R </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 0603 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'></td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 15 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> R6 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 47k </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 0805 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'></td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 16 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> RS </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 1R // 4R7 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1206 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'></td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 17 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> D1 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> SF28 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> DIP </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> Fast 2A/600V </td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 18 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> D2 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> FFM107 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> SOD-123L </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> Fast 1A/1000V </td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 19 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> Extra-D </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> 1N4148 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> SOD-123 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 250mA/75V </td> </tr> <tr style='height:13.5pt'> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt; height:13.5pt'> 20 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt;height:13.5pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt;height:13.5pt'> DB </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt;height:13.5pt'> TB6S </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt;height:13.5pt'> --- </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt;height:13.5pt'> 600V/1A diode bridge </td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 21 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> Q1 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> STD2HNK60 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> TO-251 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 2A/600V MOSFET </td> </tr> <tr> <td style='border:solid #009EB8 1.0pt;border-top:none;padding:.75pt .75pt .75pt .75pt'> 22 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> 1 </td> <td width=92 style='width:68.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> IC1 </td> <td width=142 style='width:106.8pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:.75pt .75pt .75pt .75pt'> RT8487GJ6 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> TSOT23-6 </td> <td style='border-top:none;border-left:none;border-bottom:solid #009EB8 1.0pt; border-right:solid #009EB8 1.0pt;padding:.75pt .75pt .75pt .75pt'> LED driver controller </td> </tr> </table> </div> <a name=c6> </a> <h2 id="__Bookmark__6">6. PCB Layout</h2> The 8W LED driver application is build on a small single sided PCB. Due to the floating controller topology, the components around the IC should be compact and close to the IC, and the layout should provide sufficient creepage and clearance margin for the high voltage swing. It should be noted that this layout is a preliminary version, and needs some further fine tuning to optimize performance: The buck inductor orientation with respect to EMI coil needs some modification: currently the stray field of L1 couples into LX1 and causes higher EMI readings. <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image027_en.jpg" ><img width=603 height=164 id="Picture 5" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image027_en.jpg" alt="Technical Document Image Preview"></a> Figure 8 <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image028_en.jpg" ><img width=603 height=175 id="Picture 7" src="/content/dam/richtek-eds/resources/application-notes/an019/html-images-en/image028_en.jpg" alt="Technical Document Image Preview"></a> Figure 9 <a name=c7> </a> <h2 id="__Bookmark__7">7. Conclusion</h2> RT8487 makes it possible to design a very cost effective 8W LED driver which has good performance and meets the requirements of today’s LED driver market. Please visit Richtek’s website for more information on Richtek’s innovative LED driver solutions at <a href="http://www.richtek.com/LED/?utm_source=AN012&utm_medium=RTWWW&utm_campaign=AppNote" target="_blank" class="link">http://www.richtek.com/LED/</a> <a name=cn> </a> <table border="1" cellspacing="0" cellpadding="0" style="width: 637.5pt; border-collapse: collapse; border: medium none;" class="3-51"> <tbody> <tr style="height: 17pt;"> <td style="border-width: 1pt 1px 1px 1pt; border-style: solid; border-color: #009eb8; background-color: #009eb8; background-image: url(e); background-repeat: repeat; background-attachment: scroll; background-clip: border-box; background-origin: padding-box; background-size: auto auto; padding-right: 5pt; padding-left: 5pt; height: 17pt;" colspan="2"> Next Steps </td> </tr> <tr style="height: 17pt;"> <td style="border-width: 1pt 1px 1px 1pt; border-style: solid; border-color: #009eb8; background-color: #ffffff; background-image: url(e); background-repeat: repeat; background-attachment: scroll; background-clip: border-box; background-origin: padding-box; background-size: auto auto; padding-right: 5pt; padding-left: 5pt; height: 17pt;"> Richtek Newsletter </td> <td style="border-width: 1pt 1px 1px 1pt; border-style: solid; border-color: #009eb8; background-color: #ffffff; background-image: url(e); background-repeat: repeat; background-attachment: scroll; background-clip: border-box; background-origin: padding-box; background-size: auto auto; padding-right: 5pt; padding-left: 5pt; height: 17pt;"> <a class="link" href="http://www.richtek.com/My%20Richtek/Newsletters" target="_blank">Subscribe Richtek Newsletter</a> </td> </tr> <tr style="height: 17pt;"> <td style="border-width: 1pt 1px 1px 1pt; border-style: solid; border-color: #009eb8; background-color: #ffffff; background-image: url(e); background-repeat: repeat; background-attachment: scroll; background-clip: border-box; background-origin: padding-box; background-size: auto auto; padding-right: 5pt; padding-left: 5pt; height: 17pt;"> Download </td> <td style="border-width: 1pt 1px 1px 1pt; border-style: solid; border-color: #009eb8; background-color: #ffffff; background-image: url(e); background-repeat: repeat; background-attachment: scroll; background-clip: border-box; background-origin: padding-box; background-size: auto auto; padding-right: 5pt; padding-left: 5pt; height: 17pt;"> <a class="link" href="~/media/AN%20PDF/AN019_EN.ashx">Download PDF</a> </td> </tr> </tbody> </table> </div> <div class=WordSection2> </div>

false

i18n(article-attachment.related-product-list.title)

_ATTACHMENT_HIDDEN_FIELD_

related-products

_ATTACHMENT_HIDDEN_FIELD_

applicationNoteArticle

width

fixed-width

articleSection

application-note

true

relatedProductList

left

btnAllApplicationNote2

text-with-icon

secondary

i18n(button-item.all-application-note.button-label)

i18n(button-item.all-application-note.button-link)

_self

false

width

fixed-width

productListSection

100