- content-section
Buck converters are widely chosen across a broad range of electronic systems. The choice between synchronous and asynchronous architectures depends on input voltage, output current, efficiency, and cost requirements.
The key difference lies in the freewheeling current path. Synchronous types replace the freewheeling diode with a low-side MOSFET, significantly reducing conduction loss for high-current, high-efficiency applications. Asynchronous types use a diode as the freewheeling device, naturally operate in DCM, and offer higher light-load efficiency than synchronous converters operating in FCCM. They also eliminate shoot-through risk, simplify the control architecture, and provide higher flexibility in external component selection, making them well suited for higher-voltage power systems such as 48V.
Selecting the right Buck architecture for your application helps optimize system performance, reliability, and overall design cost.
Wearables
/content/richtek-eds/en/applications/235/2353
Buck Converter
/content/richtek-eds/en/products/2205801/2206201/2206601
AI Server