8
8
8
4
1rem
1rem
1rem
1rem
rt-dark-800
headline-3
false
true
basicInfoTitle
12
12
12
12
36
24
24
12
rt-dark-800
basicInfoSubtitle
basicInfoImageSwitcher
The RTQ4551-QT is a 6-channel LED driver capable of delivering 200mA for each channel with a DC-DC controller. The current-mode switching DC-DC controller supports boost or SEPIC topologies and operates in the 300kHz to 2.2MHz frequency range. The device accepts a wide 3V to 40V input voltage range and withstands direct automotive cold crank and load-dump events. The internal current sinks support a maximum of 3.5% current accuracy and mismatching for excellent brightness uniformity in each string of LEDs. The RTQ4551-QT automatically detects and disconnects any unconnected and/or broken strings during operation from control loop to prevent VLED from overvoltage. To provide enough headroom for current sink operation, the boost controller monitors the minimum voltage of the LEDx pins and regulates an optimized output voltage for power efficiency. The RTQ4551-QT has a standard I<sup>2</sup>C digital interface for functional settings. Moreover, the boost switching and PWMO frequency can be programmed by external resistors or the I<sup>2</sup>C interface. Comprehensive diagnostic information is also available through the I<sup>2</sup>C interface. When an abnormal situation occurs, a status signal will be sent to the system.The RTQ4551-QT is available in a 38-pin VDFN package and operates within a temperature range of -40°C to 125°C.
3
RTQ4551-QT Typical Circuit
anchor
productDetailSection
i18n(anchor-tab.product-detail-section.title)
productDetailSectionAnchorTab
orderingInformationSection
i18n(anchor-tab.ordering-information-section.title)
orderingInformationSectionAnchorTab
technicalDocumentationSection
i18n(anchor-tab.technical-documentation-section.title)
technicalDocumentationSectionAnchorTab
designToolSection
i18n(anchor-tab.design-tool-section.title)
designToolSectionAnchorTab
applicationSection
i18n(anchor-tab.application-section.title)
applicationSectionAnchorTab
supportSection
i18n(anchor-tab.support-section.title)
supportSectionAnchorTab
24
24
24
24
i18n(tabs.product-detail.title)
productDetailTabs
i18n(tab-item.parameter-section.title)
parameterSection
parameterSectionTab
i18n(tab-item.package-size-pin-size-section.title)
packageSizePinsSizeSection
packageSizePinsSizeSectionTab
i18n(tab-item.product-feature-section.title)
productFeatureSection
productFeatureSectionTab
24
24
24
24
32
32
32
32
scrollable-table
parameterTable
normal-table
table-group
package-size-pins-size
packageSizePinsSizeTable
productFeature
<div class="spec-list"><ul class="lv1"><li>Wide Operating Input Voltage: 5V to 40V - Support Cold Crank Down to 3V Supply After Start-Up </li><li>High Output Voltage: Up to 45V </li><li>NMOS or PMOS Input Protection Switch </li><li>Integrated Boost and SEPIC Controller for LED Driver - Switching Frequency: 300kHz to 2.2MHz - Spread Spectrum for Reduced EMI - Automatic Output Voltage Discharged When Controller Is Disabled - Sync Input to Set Switching Frequency from an External Signal </li><li>6-Channel Current Sinks with 30mA to 200mA per Channel </li><li>Channel Current Regulation with Accuracy ±3.5% and Matching 3.5% </li><li>Up to 16-Bit Dimming Resolution with I<sup>2</sup>C or PWM Input </li><li>Programmable Multi-Dimming Operation Mode - Up to 16-Bit PWM and Mixed Dimming Resolution - Up to 12-Bit DC Dimming Resolution </li><li>Dimming Ratio 32000:1 in PWM Mode Using a 152Hz Output PWM Frequency </li><li>Dimming Ratio 4000:1 in DC Mode </li><li>Advanced Slope Function for Smooth Dimming </li><li>Phase-Shift PWM Mode Reduces Audible Noise </li><li>Adaptive Headroom Control Method to Optimize Output Voltage for Power Efficiency </li><li>Protections - LED Open and Short Fault - Boost OCP, OVP, and UVP Protection - VIN OVP, OCP, and UVLO Fault - Warming and Over-Temperature Protection - FSET Pin Short Detection Protection - Extensive Fault Diagnostics and Fault Indicator Signal Output </li><li>Embedded Memory with MTP </li><li>AEC-Q100 Grade 1 Qualified </li><li>Ambient Temperature Range: -40°C to 125°C </li><li>Junction Temperature Range: -40°C to 150°C </li></ul></div>
24
24
24
24
i18n(tabs.ordering-information.title)
orderingInformationTabs
i18n(tab-item.product-section.title)
productSection
productSectionTab
i18n(tab-item.evb-section.title)
evbSection
evbSectionTab
i18n(tab-item.ordering-detail-section.title)
orderingDetailSection
orderingDetailSectionTab
24
24
24
24
productImageSwitcher
RTQ4551-QT Ordering Information
normal-table
card-list
products
productTable
evbImageSwitcher
normal-table
card-list
evb
evbTable
orderingDetail
technical-documents
RTQ4551-QT
technicalDocumentMultipleTable
design-tools
RTQ4551-QT
designToolMultipleTable
32
56
56
56
rt-blue-800
i18n(text.application-title.text-content)
applicationTitle
withLine
24
24
24
24
<div class="spec-list"><ul class="lv1"><li>Automotive Infotainment Displays </li><li>Automotive Instrument Clusters </li><li>Heads-Up Displays </li></ul></div>
applicationContent
35
35
35
35
keywordList
56
56
56
56
rt-blue-800
i18n(text.support-card-title.text-content)
supportCardTitle
withLine
40
40
40
24
supportCards
i18n(support-card-item.technical-support.title)
i18n(support-card-item.technical-support.description)
i18n(support-card-item.technical-support.learn-more-text)
i18n(support-card-item.technical-support.url)
technicalSupportCard
i18n(support-card-item.ordering.title)
i18n(support-card-item.ordering.description)
i18n(support-card-item.ordering.learn-more-text)
i18n(support-card-item.ordering.url)
orderingSupportCard
i18n(support-card-item.sales.title)
i18n(support-card-item.sales.description)
i18n(support-card-item.sales.learn-more-text)
i18n(support-card-item.sales.url)
salesSupportCard
56
56
56
32