This website stores cookies on your computer. These cookies are used to collect information about how you interact with our website and allow us to remember you. We use this information in order to improve and customize your browsing experience and for analytics and metrics about our visitors both on this website and other media. To find out more about the cookies we use, see our Cookie Statement. If you decline, your information won’t be tracked when you visit this website. A single cookie will be used in your browser to remember your preference not to be tracked. Find out more here.
RT9711A / B / C / D 为高性价比、低电压、单 N-MOSFET 的高侧电源开关,适用于自供电 (self-powered) 和总线供电 (bus- powered) 的串行总线 (USB) 应用。RT9711 系列都配备了电荷泵电路来驱动内部 MOSFET 开关。开关的 80mΩ 低 RDS(ON) 符合 USB 压降要求。具有一个输出指示信号来表示错误状况给 USB 控制器。其它特点包括插入时的软启动,用来限制涌入电流、过热关断,用来防止开关因高电流负载造成的严重失效、欠压锁定 (UVLO),确保有有效的输入电压出现前,IC 保持关机、双埠 (RT9711A/B) 的故障电流限制在 2.5A (典型值),单埠 (RT9711C/D) 限制在 1A,符合 USB 的电源要求、25μA 低静态电流使该元件非常适用于可携式电池供电的设备。RT9711 系列提供 SOT-23-5、TSOT- 23-5、SOP -8 和 MSOP -8 适用于不同板子的应用。
符合 USB 规范
内置 N-MOSFET
典型 RDS(ON) : 80mΩ (SOT-23-5 & TSOT-23-5) 和 90mΩ (SOP-8 & MSOP-8)
输出可以被强制高于输入 (Off-State)
低线电流:
25μA 典型的开关打开状态 (Switch On State)
1μA 典型的开关关闭状态 (Switch Off State)
保证 RT9711A/B 1.5A 和 RT9711C/D 0.6A 的连续负载电流
宽输入电压范围: 2.5V 至 5.5V
开路汲极错误讯号 (Fault Flag) 输出
热插入应用 (软启动)
欠压锁定 (UVLO) 典型值 1.7V
电流限制保护
过热保护
反向电流阻断 (无二极管)
SOT-23-5 和 TSOT-23-5 小封装
UL 认证-E219878
TUV IEC60950-1 : 2005 认证
符合 RoHS 标准及 100% 不含铅
订阅接收最新产品讯息 (请先登入)
.
Please check your email box and click validation url.