AGREE

This website stores cookies on your computer. These cookies are used to collect information about how you interact with our website and allow us to remember you. We use this information in order to improve and customize your browsing experience and for analytics and metrics about our visitors both on this website and other media. To find out more about the cookies we use, see our Cookie Statement.
If you decline, your information won’t be tracked when you visit this website. A single cookie will be used in your browser to remember your preference not to be tracked. Find out more here.

RT4805B

2.5MHz, Synchronous Boost Regulator with Bypass Mode

RT4805B
New

The RT4805B allows systems to take advantage of new battery chemistries that can supply significant energy when the battery voltage is lower than the required voltage for system power ICs. By combining built-in power transistors, synchronous rectification, and low supply current; this IC provides a compact solution for systems using advanced Li-Ion battery chemistries. The RT4805B is a boost regulator designed to provide a minimum output voltage from a single-cell Li-Ion battery, even when the battery voltage is below system minimum. In boost mode, output voltage regulation is guaranteed to a maximum load current of 2A. Quiescent current in Shutdown Mode is less than 1μA, which maximizes battery life. The regulator transitions smoothly between Bypass and normal Boost Mode. The device can be forced into Bypass Mode to reduce quiescent current.

The RT4805B is available in the WL-CSP-16B 1.67x1.67 (BSC) package.

Applications

  • Single-Cell Li-Ion, LiFePO4 Smart-Phones or Tablet
  • 2.5G/3G/4G Mini-Module Data Cards

Key Spec.

RT4805B
Status Active
Vin (min) (V) 1.8
Vin (max) (V) 5
Vout (min) (V) 2.85
Vout (max) (V) 4.4
Output Adj. Method Digital
Iq (typ) (mA) 0.055
SW Current Limit (typ) (A) 4
Freq (typ) (kHz) 2500
Freq (min) (kHz) 2000
Freq (max) (kHz) 3000
Ron (typ) (Ohm) 0.04;0.06
Interface I2C
Features Adjustable Current Limit;Enable Input;OCP;OVP;Power Good;SCP;UVP
Package Type WL-CSP1.67x1.67-16(BSC)

Features

  • 4 Few External Components : 0.47μH Inductor and 0603 Case Size Input and Output Capacitors

  • Input Voltage Range : 1.8V to 5V

  • Output Range from 2.85V to 4.4V
    ► VSEL = L 3.15V
    ► VSEL = H 3.6V

  • Maximum Continuous Load Current : 2A at VIN > 2.65V Boosting VOUT to 3.35V

  • Up to 96% Efficient

  • True Bypass Operation when VIN > Target VOUT

  • Internal Synchronous Rectifier

  • True Load Disconnect when Shut Down

  • Forced Bypass Mode

  • VSEL Control to Optimize Target VOUT

  • Short-Circuit Protection

  • I2C Controlled Interface

  • Ultra Low Operating Quiescent Current

  • Small WL-CSP 16B Package

Datasheet

DS4805B-01.pdf

Datasheet

DS4805B-01.pdf

Contact us for more information