RT8130B

12V High Efficiency Synchronous Buck PWM Controller

RT8130B
New

The RT8130B is a high efficiency single phase synchronous Buck DC/DC controller with 5V/12V supply voltage. The RT8130B has embedded MOSFET gate driver with high driving capability, supporting driving voltage up to 12V for high output current application. This device uses lossless low-side MOSFET RDS(ON) current sense technique for over-current protection with adjustable threshold set by the LGATE pin (LGOCS). Other features include power good indication, enable/disable control and internal soft-start. The RT8130B also provides fault protection functions to protect the power stage output. With above functions, the IC provides customers a cost-effective solution for high efficiency power conversion. The RT8130B is available in the WDFN-10L 3x3 package.

Applications

  • Motherboard, Memory/Chip-set Power
  • Graphic Card, GPU/Memory Core Power
  • Low Voltage, High Current DC/DC Regulator

Key Spec.

RT8130B
Status Active
Vs (typ) (V) 12;5
Vin (min) (V) 2.5
Vin (max) (V) 21
Vout (min) (V) 0.8
Output Adj. Method Resistor
Accuracy (+/- %) 0.875
Freq (typ) (kHz) 300
Iq (typ) (mA) 2
Ext Sync No
Features Adjustable Current Limit;Cycle-by-Cycle Current Limit;Enable Input;Force PWM;OCP;OVP;Power Good;UVP;Voltage Mode Control
Package Type WDFN3x3-10

Features

  • High Light Load Efficiency

  • Single 5V to 12V Driver Voltage

  • Integrated High Driving Capability N-MOSFET Gate Drivers

  • 300kHz Fixed Frequency Internal Oscillator

  • 88% Maximum PWM Duty Cycle

  • Power Good Indicator

  • Enable/Disable Control

  • Internal Soft-Start

  • Lossless Low-Side MOSFET RDS(ON) Current Sensing for Over-Current Fault Monitoring

  • LGATE Over-Current Setting (LGOCS)

  • OCP, UVP, OVP, OTP, UVLO

RT8130BGQW
Package Type:WDFN3x3-10