The RTQ6134 is a high-accuracy current-sense monitor with an I2C and SMBus-compatible interface. The device delivers comprehensive system data by reading the load current and power.
The device monitors both the voltage drop across the sense resistor and the bus voltage, converting them into current in amperes and power in watts through an internal analog-to-digital converter (ADC). Programmable calibration, adjustable conversion times, and an averaging function are also built in for enhanced design flexibility.
The RTQ6134 provides a wide operating temperature range from -40°C to 125°C and operates with an input voltage range from 2.5V to 5.5V. The device can sense current on common-mode bus voltages ranging from -0.3V to 60V.
The RTQ6134 is available in small TWL-CSP0.77x1.57-8 package.
<div class="spec-list">
<ul class="lv1">
<li>I<sup>2</sup>C and SMBus-Compatible Interface</li>
<li>Bi-Directional Current Sensing, Available for High-Side or Low-Side Sensing</li>
<li>Input Voltage Range: 2.5V to 5.5V</li>
<li>Common-Mode Input Voltage: -0.3V to 60V</li>
<li>Current Monitoring Accuracy
<ul class="lv2">
<li>12-bit ADC Resolution</li>
<li>0.5% Gain Error (Maximum)</li>
<li>80μV Offset (Maximum)</li>
</ul>
</li>
<li>Over/Under Current, Over/Under Voltage, and Overpower Alerts</li>
<li>60V Common Mode Voltage, Suitable for 48V Server Systems</li>
<li>Two Device Address Options, Each with Four Pin-Selectable I<sup>2</sup>C Slave Addresses</li>
<li>Junction Temperature Range: -40°C to 125°C</li>
<li>8-Ball TWL-CSP 0.77mm × 1.57mm Package</li>
</ul>
</div>
<div class="spec-list">
<ul class="lv1">
<li>Servers</li>
<li>Network Equipment</li>
<li>Notebook Computers</li>
<li>POE Devices</li>
</ul>
</div>