<h1>How PCB Mismatch Affects Common-N DCR Current Sensing in Multi-phase Applications</h1> <Br><Br> <h2 id="__Bookmark__0">Abstract</h2> <p class=MsoNormal>It has been many years since GPU power solutions (OVR3i+ / OVR4i+) adopt common-N structure for DCR current sensing in multi-phase applications. There are two common-N type multi-phase controllers for graphic core power application in Richtek, the 3 phases controller RT8843A for OVR3i+ solution and the 8 phases controller RT8848A for OVR4i+ solution respectively. The common-N structure has benefit of pin-saving in a limited package size as compared to differential structure of DCR current sensing. However, this structure has an intrinsic drawback of current unbalance issue as PCB layout is not symmetric especially in high phase count applications. High phase count is a trend in computing graphic cards or data mining machines. The layout can’t always be symmetric in a limited board size and even the priority of high speed signal routing for GPU/DDR is much higher than power routing. Therefore, the effect of R_PCB non-symmetric on current sensing is a crucial topic in multi-phase applications. Some advanced controller, such as RT8848A, has function of current balance gain adjustment according to each phase by I²C communication is necessary for improving the current balance performance. In this application note, the analysis of common-N structure with different connection types are discussed. Simulation and experiments with RT8848A or RT8843A are also performed to verify the theory. In a result, user can understand the R_PCB mismatch effect on different types of common-N DCR current sensing network and choose a suitable method to implement in their application. </p> <br><br> <h2 id="__Bookmark__1">1. Introduction to DCR Current Sensing Network</h2> <p class=MsoNormal>The DCR current sensing network has been a popular method for inductor current sensing due to the advantages of power lossless and ease of design. In Figure 1, a standard DCR current sensing circuit is presented. A pair of Rx and Cx is in parallel with inductor L. The inductor model has equivalent inductance in series with a DCR resistor. The voltage signal across Cx can be derived in equation (1). It can be noticed that as the time constant of L and DCR matches Rx and Cx (as shown in equation (2)), then the V_CX is equal to the inductor current multiplies DCR value. Both DC and AC signal of inductor current (I_L) can be achieved through the voltage of V_CX.</p> <p class=MsoNormal><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image001_zh-tw.png" ><img width=230 height=151 src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image001_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref60662518">Figure </a>1. DCR Current Sensing Topology</p> <br> <p class=Figure>Assume in s-domain, the V_CX voltage can be derived via KCL/KVL rules.</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image002_zh-tw.jpg" ><img width=680 height=52 id="圖片 2" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image002_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=Figure>when</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image003_zh-tw.jpg" ><img width=680 height=50 id="圖片 4" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image003_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=Figure>By substituting equation (2) into equation (1), the V_CX voltage can be represented as following equation.</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image004_zh-tw.jpg" ><img width=680 height=36 id="圖片 5" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image004_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=MsoNormal>From above derivation, the inductor current can be achieved via properly designing the parameters of DCR current sensing circuit. In high power applications, such as GPU core power or CPU core power, the high phase number is necessary to achieve enough current capability within a limited inductor size and power stages (MOSFET). </p> <p class=MsoNormal>There are two different structures for DCR current sensing in multi-phase applications. </p> <p class=MsoNormal>The first one is differential current sense topology as shown inFigure 2. The inductor current is sensed as the voltage across the DCR current sense capacitor. Each phase has individual positive and negative sensing pins to be connected to positive terminal and negative terminal of Cx. Therefore, the voltage across Cx can be well monitored and applied to current balance control and per-phase over-current protection. However, as the phase number increases, the necessary pin number will also increase. This structure has benefit of high accuracy of current sensing, but the high pin count is a trade-off. </p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image005_zh-tw.png" ><img width=324 height=328 src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image005_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref60666932">Figure </a>2. Differential Current Sense Topology</p> <br> <p class=Figure>On the other hand, for the second structure which is called as common-N current sense topology is shown in Figure 3. The inductor current signal can be achieved from the voltage sensing across the DCR current sensing capacitor (Cx). Different from differential type, there is only one negative pin (CSN pin) as the reference for each phase’s inductor current signal. The negative points of each phase’s Cx are connected together to the CSN pin as a common-N reference. This structure has benefit of pin-saving, but the current signal has some distortion which can result in current unbalance issues and false triggering over-current protection. In the next section, the analysis of different types of common-N structure will be addressed. </p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image006_zh-tw.png" ><img width=332 height=335 src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image006_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref60667438">Figure </a>3. Common-N Current Sense Topology<br> </p> <br><br> <h2 id="__Bookmark__2">2. Analysis of Different Types of Common-N Structure </h2> <p class=MsoNormal>There are four types of common-N structure for DCR current sensing in multi-phase applications : Type1, Type2, Type3 and Remoting methods. In this section, the analysis of these structures will be addressed, including the simulation waveforms and R_PCB effect derivation on DCR current sensing signal.</p> <Br> <h3>2.1 The Type1 Common-N Structure</h3> <p class=bady>The first type of DCR current sensing connection for common-N structure is shown in Figure 4. For simplification, a two phases condition is applied to derive the equation for discussing the effect of R_PCB on DCR current sensing signal. The R_PCB shown on the circuit are the layout impedance from inductor output node to regulating point at GPU side. According to different layout arrangement, the R_PCB impedance of each phase may be similar or different. Moreover, the deviation between R_PCB may generate an additional offset on current feedback signal (V_SEN). In order to prevent large leakage current on common-N layout trace, a small resistor Rn is applied to connect each Cx’s negative terminal together. The V_SEN signal can be derived by following steps. </p> <p class=bady>First, the V_o1, V_o2 and V_o,av are derived as :</p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image007_zh-tw.jpg" ><img width=680 height=31 id="圖片 18" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image007_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image008_zh-tw.jpg" ><img width=680 height=35 id="圖片 17" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image008_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image009_zh-tw.jpg" ><img width=680 height=47 id="圖片 19" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image009_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady>And the V_CX can be derived by following equation in s-domain.</p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image010_zh-tw.jpg" ><img width=680 height=56 id="圖片 20" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image010_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady>From equation (7), the V_CX can be represented as :</p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image011_zh-tw.jpg" ><img width=681 height=71 id="圖片 21" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image011_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady>Then the voltage signals of V_SEN1 and V_SEN2 are achieved by adding the voltage across Rn to V_CX signal.</p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image012_zh-tw.jpg" ><img width=680 height=71 id="圖片 22" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image012_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image013_zh-tw.jpg" ><img width=680 height=78 id="圖片 23" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image013_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <br> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image014_zh-tw.png" ><img width=350 src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image014_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref60143158">Figure </a>4. 2 Phases Type1 Common-N DCR Current Sensing Circuit</p> <Br> <p class=Figure>It can be noticed that the additional offset on V_SEN signal makes the controller unable to know the correct current signal. Without knowing the correct current amplitude of each phase, current balance function works abnormally. The current balance can only be achieved if R_PCB1 and R_PCB2 are the same by layout PCB symmetrically. Practically, it’s very hard to layout PCB symmetrically in high phase application, the current balance performance requires to be improved by adjusting the current balance gain to compensate the additional current offset on V_SEN signal. However, if the R_PCB deviation is too large as compared to DCR value, the performance of current balance will be limited due to the limited modification range of current balance gain. Moreover, as shown in equation (9) and (10), the current offset items are related to both per-phase inductor current (I_L1 and I_L2) and R_PCB values. Due to the current signal (I_L1 and I_L2) is the combination of DC current value and AC inductor current ripple, the offset current signal on V_SEN has both DC component and AC component. For DC component, it affects the average value of inductor sensing current; and for AC component, it changes the current ripple shape from triangle ripple to an abnormal ripple as shown in Figure 5. In this example, the DCR value is setup as 0.6mΩ, and L/DCR = RxCx for time constant matching. R_PCB1 and R_PCB2 are setup as 1mΩ and 10mΩ respectively to emulate the PCB non-symmetric issue. The abnormal current ripple may induce controller to false trigger protection functions such as OCP function. For some application as VCORE power, false triggering OCP may result the power rail shutdown and system also shutdown after then. Furthermore, if the current signal is used for output voltage loop control, the stability may become worse.</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image015_zh-tw.png" ><img width=550 id="圖片 1" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image015_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref60228892">Figure </a>5. DCR Current Sensing Signal with Type1 Common-N Structure<br> </p> <br> <h3>2.2 The Type2 Common-N Structure</h3> <p class=Figure>Figure 6 shows the Type2 common-N DCR current sensing circuit. For simplification, a two phases condition is applied to derive the equation for discussing the effect of R_PCB on DCR current sensing signal. The R_PCB shown on the circuit are the layout impedance from inductor output node to regulating point at GPU side. It can be noticed that the placement of Rn is different from Type1. The Rn is in series with DCR current sensing components (Rx and Cx). The V_SEN signal is equal to V_CX voltage across DCR current sensing capacitor (Cx). The V_SEN signal can be derived by following steps.</p> <p class=bady>First, the V_o1, V_o2 and V_o,av are derived as :</p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image016_zh-tw.jpg" ><img width=680 height=30 id="圖片 24" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image016_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image017_zh-tw.jpg" ><img width=680 height=31 id="圖片 26" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image017_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image018_zh-tw.jpg" ><img width=680 height=47 id="圖片 28" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image018_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady>And the V_CX1 can be derived by following equation in s-domain.</p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image019_zh-tw.jpg" ><img width=680 height=48 id="圖片 30" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image019_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady>From equation (14), the V_CX1 can be represented as :</p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image020_zh-tw.jpg" ><img width=680 height=71 id="圖片 31" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image020_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady>Similar to V_CX1, the V_CX2 can also be derived as below equation :</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image021_zh-tw.jpg" ><img width=680 height=73 id="圖片 33" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image021_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=Figure>And the V_SEN1 and V_SEN2 are equal to V_CX1 and V_CX2 respectively.</p> <Br> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image022_zh-tw.png" ><img width=350 src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image022_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref60668461">Figure </a>6. 2 Phases Type2 Common-N DCR Current Sensing Circuit</p> <br> <p class=Figure>The V_SEN1 and V_SEN2 can be achieved from equation (15) and equation (16). When time constant of L/DCR matches RxCx, the DCR current sensing signal equals to the sum of inductor current multiplies DCR of inductor and the additional offset. The additional offset is generated by the deviation of R_PCB multiplies inductor current between each phase. The equation of V_SEN signal is similar to the equation derived from Type1 structure. The major difference is the AC offset ripple is suppressed by RxCx filter and can be ignored as compared to DC offset. However, the DC offset still affects the current sensing signal. An example of the DCR current sensing signal with type2 common-N structure is shown in Figure 7. It can be observed that each V_SEN signal is in shape with its inductor current. In this case, the DCR value is set as 0.6mΩ, and L/DCR = RxCx for time constant matching. R_PCB1 and R_PCB2 are setup as 1mΩ and 10mΩ respectively to emulate the PCB non-symmetric issue. The V_SEN signal of both phase1 and phase2 are not proportional to DCR value due to the additional DC offset on current sensing signal. Therefore, the controller may have a hard time to control the current of each phase to achieve current balance. Moreover, the over-current protection function can’t work correctly as current signal is not accurate. For type 2 connection, the current balance can be improved by adjusting the current balance gain to compensate the Rpcb deviation. However, there is a bottleneck for this method because most of controller has limited adjustment range of current balance gain. In section4, the design tips for Rpcb variation and current balance gain will be discussed.</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image023_zh-tw.png" ><img width=550 id="圖片 7" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image023_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref60671074">Figure </a>7. DCR Current Sensing Signal with Type2 Common-N Structure</p> <Br> <h3>2.3 The Type3 Common-N Structure</h3> <p class=bady>As described in previous sections, both Type1 and Type2 can’t get accurate inductor current signal from V_SEN signal. In this section, a method based on Type2 is proposed to eliminate the R_PCB effect on V_SEN signal. Figure 8 shows a two phases Type3 common-N DCR current sensing circuit. For simplification, a two phases condition is applied to derive the equation for discussing the effect of R_PCB on DCR current sensing signal. The R_PCB shown on the circuit is the layout impedance from inductor output node to regulating point at GPU side. The resistor Rm is connected from positive terminal of DCR current sensing capacitor (Cx) to the output node of other phase’s inductor. For multiple phases application with Type3, the equivalent circuit is shown in Table 1. In order to simplify the circuit diagram, the wire connections are represented with net names and arrows. It should be noticed that it requires additional Nx(N-1) pcs resistors to connect between each phases’ output when applying Type3 method, where N is the total operating phase number. For example, the total required number of Rm is 2 x (2-1) = 2pcs in a 2 phases application. And for 3 phases application, the total required number of Rm is 3 x (3-1) = 6pcs as shown in Figure 19. The V_SEN signal can be derived by following steps.</p> <p class=bady>First, the V_o1, V_o2 and V_o,av are derived as :</p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image024_zh-tw.jpg" ><img width=680 height=30 id="圖片 34" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image024_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image025_zh-tw.jpg" ><img width=681 height=34 id="圖片 35" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image025_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image026_zh-tw.jpg" ><img width=680 height=46 id="圖片 36" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image026_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady>And the V_CX1 can be derived by following equation in s-domain.</p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image027_zh-tw.jpg" ><img width=680 height=53 id="圖片 37" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image027_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady>From equation (20), the V_CX1 can be represented as :</p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image028_zh-tw.jpg" ><img width=680 height=135 id="圖片 38" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image028_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady>Similar to V_CX1, the V_CX2 can also be derived as below equation :</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image029_zh-tw.jpg" ><img width=680 height=135 id="圖片 39" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image029_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=Figure>And the V_SEN1 and V_SEN2 are equal to V_CX1 and V_CX2 respectively.</p> <p class=Figure>For equation (21) and equation (22), if Rm is equal to Rx, the offset items are eliminated, and the equation can be represented as following.</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image030_zh-tw.jpg" ><img width=680 height=89 id="圖片 43" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image030_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image031_zh-tw.jpg" ><img width=680 height=92 id="圖片 44" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image031_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=Figure>From equation (23) and equation (24), make L/DCR = RxCx/2 for time constant matching, then the current signal can be calculated via inductor current multiplies DCR/2. It should be noticed that the equivalent DCR is divided by 2 due to additional Rm resistor. In a result, the R_PCB non-symmetric effect has been cancelled.</p> <Br> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image032_zh-tw.png" ><img width=350 src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image032_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref60674154">Figure </a>8. 2 Phases Type3 Common-N DCR Current Sensing Circuit</p> <Br> <p class=Figure>Figure 9 shows an example of the DCR current sensing signal with Type3 common-N structure. In this example, the DCR value is set as 0.6mΩ, and L/DCR = RxCx/2 for time constant matching. R_PCB1 and R_PCB2 are setup as 1mΩ and 10mΩ respectively to emulate the PCB non-symmetric issue. In this simulation, the current balance function is disabled and the output load current is 20A. The V_SEN signal of both phase1 and phase2 are proportional to their inductor current signal with the gain of DCR/2 = 0.3mΩ. Therefore, the PWM controller can get the correct current signal and adjust the PWM pulse width to achieve current balance between each phase. Moreover, over-current protection function also works correctly. The Type3 method is useful in low phase number (&lt; 4phase). If the phase number increases to 8phase, the number of required “Rm” resistor is up to 7x8 = 56pcs. A N phases Type3 structure needs additional (N-1) x N pcs resistor connected to each phase’s inductor output node. Besides, the side effect of Type3 is the DCR reduction, which makes equivalent DCR become DCR/N, where N is the phase number. After DCR reduction, the impact of current sensing comparator offset (V_{cs,ofs_comp}) becomes crucial as compared to current signal. The current sensing signal including comparator offset can be represented as below :</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image033_zh-tw.jpg" ><img width=680 height=92 id="圖片 45" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image033_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <br> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image034_zh-tw.png" ><img width=550 id="圖片 8" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image034_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref60674149">Figure </a>9. DCR Current Sensing Signal with Type3 Common-N Structure</p> <Br> <h3>2.4 The Remoting Type Common-N Structure</h3> <p class=Figure>In this section, an alternative method which can solve the current unbalance issue is proposed. As shown in Figure 10, it’s a N phases common-N DCR current sensing circuit with remoting connection. The main idea of this method is to include each phase’s R_PCB value into their own DCR value, where the R_PCB is the layout impedance from inductor output node to regulating point at GPU side. The DCR network of Rx and Cx is in parallel with power inductor and R_PCBlayoutimpedance. It should be noticed that the negative point of Cx is connected to the remoting sensing point at GPU side. A divider resistor is in parallel with Cx to compensate the deviation of R_PCB values between different phases. The V_SEN signal can be derived by following steps.</p> <p class=Figure>For V_SEN1, the equivalent inductor impedance is DCR + R_PCB1, and the V_CX1 or V_SEN1 can be calculated as following equation :</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image035_zh-tw.jpg" ><img width=681 height=71 id="圖片 46" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image035_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=Figure>If properly design the parameters to make L/(DCR+R_PCB1) = (R_X//R_d1)C_X, then the V_SEN1 is equal to the following equation :</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image036_zh-tw.jpg" ><img width=680 height=51 id="圖片 47" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image036_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=Figure>On the other hand, the V_SEN signal of the other phases can be derived by the similar method. For instance, the V_SEN signal of phase N is shown as below :</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image037_zh-tw.jpg" ><img width=680 height=71 id="圖片 48" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image037_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=Figure>For time constant matching, let L/(DCR+R_PCBN) = (R_X//R_dN)C_X, then the V_SENN is equal to the following equation :</p> <p class=MsoNormal><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image038_zh-tw.jpg" ><img width=680 height=49 id="圖片 49" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image038_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=Figure>It should be noticed that the negative terminal of R_d resistor should be routed to the remoting point at GPU side to avoid additional voltage offset on V_SEN signal.</p> <p class=Figure>In order to achieve current balance in multi-phase application, the divider resistor R_d should follow the design steps as below.</p> <p class=Figure><strong>Step1.</strong> Find the minimum value of (DCR + R_PCBX) among N phases circuit. Assume R_PCBX &lt; R_PCB1, …, R_PCBN.</p> <p class=Figure><strong>Step2.</strong> For current balance condition, assume I_L1 = I_L2 =…= I_LN and V_SEN1 = V_SEN2 =…= V_SENN.</p> <p class=Figure><strong>Step3.</strong> Calculate the R_d value for each phase.</p> <p class=Figure>By utilizing the condition in step2, the relation between R_dX and the other R_d can be derived as below :</p> <p class=Figure>For R_d1, </p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image039_zh-tw.jpg" ><img width=681 height=49 id="圖片 50" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image039_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=Figure>For R_dN,</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image040_zh-tw.jpg" ><img width=680 height=51 id="圖片 51" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image040_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=Figure>From equation (30), the R_d1 can be calculated as below :</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image041_zh-tw.jpg" ><img width=680 height=68 id="圖片 52" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image041_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=Figure>From equation (31), the R_dN can be calculated as below :</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image042_zh-tw.jpg" ><img width=680 height=71 id="圖片 53" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image042_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=Figure>In a summary, the R_PCB effect on current sensing signal can be solved if considering the R_PCB value into the parameters design of DCR current sensing circuit. In Figure 11, the simulation result of a 2 phases DCR current sensing network with remoting type for R_PCB cancellation is presented. In this example, the DCR value is set as 0.6mΩ, and (Rx, Cx, R_d1, R_d2) follow equation (26) and equation (28) for time constant matching. R_PCB1 and R_PCB2 are setup as 1mΩ and 10mΩ respectively to emulate the PCB non-symmetric issue. In this simulation, the current balance function is disabled and the output load current is 20A. The V_SEN signal of both phase1 and phase2 are proportional to their inductor current signal with the gain of (DCR + R_PCB1) x R_d1 / (R_d1 + Rx) and (DCR + R_PCB2) x R_d2 / (R_d2 + Rx) respectively. Therefore, the PWM controller can get the correct current signal and adjust the PWM pulse width to achieve current balance between each phase. Moreover, over-current protection function also works correctly.</p> <p class=Figure>In the next section, a practical example of an 8 phase controller which adopts the remoting type common-N circuit to solve the R_PCB effect will be performed. </p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image043_zh-tw.png" ><img width=350 src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image043_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref60739414">Figure </a>10. The N Phases Remoting Type Common-N DCR Current Sensing Circuit </p> <br> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image044_zh-tw.png" ><img width=550 id="圖片 9" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image044_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref74144524">Figure </a>11. DCR Current Sensing Signal with Remoting Type Common-N Structure</p> <Br> <h3>2.5 Summary and Comparison of the Four Types of Common-N DCR Current Sensing Structures</h3> <p class=bady>We have introduced four types of common-N DCR current sensing circuit in previous sections. For Type1, there is an offset, which combined both DC and AC terms, on the current sensing signal and the offset influences both current balance and per-phase over-current protection. For Type2, there is a DC offset, which comes from the deviation of R_PCB, on the current sensing signal and the offset affects both current balance and per-phase over-current protection. For Type3, the R_PCB effect can be cancelled by connecting the positive terminal of C_X to each phases’ inductor output nodes. Although the equivalent DCR is reduced by the connected phase number and it needs more resistors in application circuit. This method can effectively solve the current unbalance issue and make per-phase over-current protection function normally. For remoting type, the R_PCB is considered with the inductor’s DCR for designing the parameters of DCR current sensing circuit. Therefore, the R_PCB effect can be well solved if R_PCB values are correct. Table 1 summarized the sensing offset generated from these four types of common-N DCR current sensing circuit.</p> <Br> <p class=Figure>Table 1. Summary Table of the Four Types of Common-N DCR Current Sensing Structures</p> <div> <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0 width=850 style='width:637.5pt;border-collapse:collapse;border:none'> <tr style='height:17.0pt'> <td width=340 style='width:254.85pt;border:solid #009EB8 1.0pt;background: #009EB8;padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt'> <p class=bady style="text-align: center">Type1</p> </td> <td width=340 style='width:254.85pt;border:solid #009EB8 1.0pt;border-left: none;background:#009EB8;padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt'> <p class=bady style="text-align: center">Type2</p> </td> </tr> <tr> <td width=340 valign=top style='width:254.85pt;border:solid #009EB8 1.0pt; border-top:none;padding:0cm 5.4pt 0cm 5.4pt'> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image045_zh-tw.png" > <img width=236 height=239 src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image045_zh-tw.png" alt="Technical Document Image Preview" style="text-align: center"></a></p> </td> <td width=340 valign=top style='width:254.85pt;border-top:none;border-left: none;border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt'> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image046_zh-tw.png" > <img width=257 height=225 src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image046_zh-tw.png" alt="Technical Document Image Preview" style="text-align: center"></a></p> </td> </tr> <tr> <td width=340 valign=top style='width:254.85pt;border:solid #009EB8 1.0pt; border-top:none;padding:0cm 5.4pt 0cm 5.4pt'> <p class=bady>Sensing offset </p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image047_zh-tw.png" ><img width=383 height=62 id="圖片 54" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image047_zh-tw.png" alt="Technical Document Image Preview"></a></p> </td> <td width=340 valign=top style='width:254.85pt;border-top:none;border-left: none;border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt'> <p class=bady>Sensing offset</p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image048_zh-tw.png" ><img width=383 height=81 id="圖片 55" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image048_zh-tw.png" alt="Technical Document Image Preview"></a></p> </td> </tr> <tr> <td width=340 style='width:254.85pt;border:solid #009EB8 1.0pt;border-top: none;background:#009EB8;padding:0cm 5.4pt 0cm 5.4pt'> <p class=bady style="text-align: center">Type3</p> </td> <td width=340 style='width:254.85pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; background:#009EB8;padding:0cm 5.4pt 0cm 5.4pt'> <p class=bady style="text-align: center">Remoting Type</p> </td> </tr> <tr> <td width=340 valign=top style='width:254.85pt;border:solid #009EB8 1.0pt; border-top:none;padding:0cm 5.4pt 0cm 5.4pt'> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image049_zh-tw.png" > <img width=222 height=254 src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image049_zh-tw.png" alt="Technical Document Image Preview" style="text-align: center"></a></p> </td> <td width=340 valign=top style='width:254.85pt;border-top:none;border-left: none;border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt'> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image050_zh-tw.png" > <img width=217 height=248 src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image050_zh-tw.png" alt="Technical Document Image Preview" style="text-align: center"></a></p> </td> </tr> <tr> <td width=340 valign=top style='width:254.85pt;border:solid #009EB8 1.0pt; border-top:none;padding:0cm 5.4pt 0cm 5.4pt'> <p class=bady>Sensing offset</p> <p class=bady>1. If Rm = Rx, the PCB effect can be cancelled.</p> <p class=bady>2. Design<a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image051_zh-tw.png" ><img width=93 height=41 id="圖片 56" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image051_zh-tw.png" alt="Technical Document Image Preview"></a>, then <a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image052_zh-tw.png" ><img width=107 height=42 id="圖片 57" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image052_zh-tw.png" alt="Technical Document Image Preview"></a></p> </td> <td width=340 valign=top style='width:254.85pt;border-top:none;border-left: none;border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt'> <p class=bady>Sensing offset</p> <p class=bady>1. If<a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image053_zh-tw.png" ><img width=294 height=70 id="圖片 58" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image053_zh-tw.png" alt="Technical Document Image Preview"></a>, the PCB effect can be cancelled.</p> <p class=bady>2. Design<a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image054_zh-tw.png" ><img width=211 height=49 id="圖片 59" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image054_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image055_zh-tw.png" ><img width=260 height=47 id="圖片 60" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image055_zh-tw.png" alt="Technical Document Image Preview"></a></p> </td> </tr> </table> </div> <br><br> <h2 id="__Bookmark__3">3. Design Consideration for Rn </h2> <p class=bady>For common-N DCR current sensing structure, there is only one reference point (V_CSN) for current signal detection. As shown in Figure 12, for type 1, 2 and 3, a small resistor Rn is connected between inductor output node and the common-N reference point for each phase. The Rn is applied to limit the leakage current on the trace when there is a voltage drop across inductor output node and common-N point. This voltage drop is generated by the R_PCB layout difference between each rail. In order to reduce the leakage current on these traces, we can use a large Rn to limit the current. However, the selection of Rn should also consider the RC time delay on common-N voltage (V_CSN). The RC time constant of (Rn, Cn) affects the response time of current feedback signal, if RC time constant is larger than switching period (1/f_SW), where f_SW is switching frequency of PWM, the current feedback signal will be delayed and the loop response becomes slower. Therefore, the RC time constant should be smaller than switching period to guarantee the transient performance. Generally, the minimum value of Cn is suggested to be larger than 10nF/0603/6.3V for noise filtering on local CSN pin. Then, the selection guide of Rn can follow below criterion :</p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image056_zh-tw.jpg" ><img width=681 height=43 id="圖片 61" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image056_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=bady>For example, if Cn is designed with 10nF and f_SW = 300kHz, the Rn is recommended to be 50<span lang=EN-US style='font-family:Symbol'>W</span> to minimize the leakage current and also meet design criterion.</p> <p class=bady><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image057_zh-tw.png" ><img width=400 src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image057_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref60765476">Figure </a>12. Common-N Current Sense Topology with Rn and Cn</p> <br><br> <h2 id="__Bookmark__4">4. Case Study and Design Tips</h2> <p class=bady>In this chapter, some practical application examples with different type of common-N DCR current sensing connection are presented. The simulation results are simulated with the FineSim spice model based on chip-level (Richtek internal design tools.</p> <br> <h3>4.1 Practical Design Example of Type2 Common-N DCR Current Sensing</h3> <p class=MsoNormal>The Type1 and Type2 DCR current sensing structures are introduced and analyzed in chapter 2. The main difference between these two methods is the the AC offset ripple is suppressed by RxCx filter in Type2 connection. Frankly speaking, Type1 connection is not a recommended method for common-N DCR applications. The additional AC ripple injected into inductor current sensing signal generates the wrong current signal and it is unacceptable for most of IC controllers. Therefore, we will not use Type1 as an example in practical applications. Here we are going to introducing the design limitation according to current balance gain and R_PCB values when using the Type2 connection. Then, we will summarize a design rule to make sure the user has enough adjustable range of current balance gain to compensate the R_PCB effect. In a result, some practical design examples will be presented.</p> <p class=MsoNormal>First, for a given controller which applies common-N DCR current sensing structure, take RT8848A as an example, the RT8848A is an 8 phase multi-phase synchronous Buck controller which is optimized for high performance graphic microprocessor and support Nvidia OVR4i+ specification. A simplified application circuit for describing the DCR current sensing circuit connection is shown in Figure 13. For full application schematic, please refer to RT8848A datasheet [reference 3]. The adjustable range of current balance gain for RT8848A is from 0.68 to 1.24. Therefore, the ratio of maximum gain and minimum gain is calculated by below equation.</p> <p class=MsoNormal><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image058_zh-tw.jpg" ><img width=680 height=48 id="圖片 62" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image058_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <br> <p class=MsoNormal><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image059_zh-tw.png" ><img width=500 src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image059_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref76397913">Figure </a>13. Simplified Application Circuit for RT8848A with Type2 DCR Current Sensing Network<br> </p> <br> <p class=MsoNormal>Next, when applying with common-N DCR current sensing network in multi-phase application, the current feedback signal (V_CSi) includes both DCR term and Rpcb term as derived in chapter 2. The V_CSi for each phase can be represented as below equation. </p> <p class=MsoNormal><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image060_zh-tw.jpg" ><img width=681 height=66 id="圖片 63" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image060_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=MsoNormal>Where the DCR term is :</p> <p class=MsoNormal><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image061_zh-tw.jpg" ><img width=680 height=63 id="圖片 64" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image061_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=MsoNormal>And the Rpcb term is :</p> <p class=MsoNormal><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image062_zh-tw.jpg" ><img width=680 height=61 id="圖片 65" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image062_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=MsoNormal>For current balance adjustment, the maximum current feedback signal (V_{CS_max}) and minimum current feedback signal (V_{CS_min}) should follow the rule as below :</p> <p class=MsoNormal><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image063_zh-tw.jpg" ><img width=681 height=49 id="圖片 67" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image063_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=MsoNormal>The equation (39) should always be positive. In order to properly compensate the PCB effect with current balance gain, the equation (39) should be considered during PCB layout in practical application. Following are two simulation examples with different PCB layout, the first one has non-symmetric PCB layout and fail to meet equation (39). The second one has relatively symmetric PCB layout and meet equation (39). The simulation performs current balance result from light load to heavy load with 8 phase configuration. As shown in Figure 14, the current balance result of first simulation case is presented. The R_PCB values are summarized in Table 2. The current signal ratio between maximum and minimum value can be calculated by substituting the PDN (Power Delivery Network) values to equation (39), and the calculation result is shown below :</p> <p class=MsoNormal><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image064_zh-tw.jpg" ><img width=680 height=48 id="圖片 68" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image064_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=MsoNormal>From equation (40), it is obvious that the PDN value is over the design criterion. Therefore, the current balance result is worse even with modified current balance gain. The average current of each phase in simulation result at IOUT = 240A are listed in Table 3 and Table 4.</p> <br> <p class=MsoCaption><a name="_Ref74168368">Table </a>2. PDN Design Value of Non-symmetric PCB Layout</p> <div> <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0 width=850 style='width:637.5pt;border-collapse:collapse;border:none'> <tr style='height:17.0pt'> <td width=340 colspan=2 style='width:254.8pt;border:solid #009EB8 1.0pt; background:#009EB8;padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt'> <p class=MsoNormal style="text-align: center">Inductor DCR = 0.5mΩ</p> </td> </tr> <tr style='height:17.0pt'> <td width=170 style='width:127.4pt;border:solid #009EB8 1.0pt;border-top: none;padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt'> <p class=MsoNormal style="text-align: center">R_PCB1 = 1.441mΩ</p> </td> <td width=170 style='width:127.4pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt'> <p class=MsoNormal style="text-align: center">R_PCB5 = 0.269m<span lang=EN-US style='font-family:Symbol; color:black'>W</span></p> </td> </tr> <tr> <td width=170 style='border-left: 1.0pt solid #009EB8; border-right: 1.0pt solid #009EB8; border-bottom: 1.0pt solid #009EB8; width:127.4pt; padding:0cm 5.4pt 0cm 5.4pt;height:17pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>R_PCB2 = 1.401mΩ</p> </td> <td width=170 style='width:127.4pt;border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>R_PCB6 = 0.378mΩ</p> </td> </tr> <tr style='height:17.0pt'> <td width=170 style='border-left: 1.0pt solid #009EB8; border-right: 1.0pt solid #009EB8; border-bottom: 1.0pt solid #009EB8; width:127.4pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>R_PCB3 = 1.399mΩ</p> </td> <td width=170 style='width:127.4pt;border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal style="text-align: center">R_PCB7 = 0.426mΩ</p> </td> </tr> <tr style='height:17.0pt'> <td width=170 style='border-left: 1.0pt solid #009EB8; border-right: 1.0pt solid #009EB8; border-bottom: 1.0pt solid #009EB8; width:127.4pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>R_PCB4 = 1.406mΩ</p> </td> <td width=170 style='width:127.4pt;border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal style="text-align: center">R_PCB8 = 0.472mΩ</p> </td> </tr> </table> </div> <Br><BR> <p class=MsoCaption><a name="_Ref74231540">Table </a>3. Average Current of Each Phase with Default CB Gain (Non-Symmetric PCB Layout)</p> <div> <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0 width=850 style='border-collapse:collapse;border:none'> <tr style='height:17.0pt'> <td width=62 style='width:46.25pt;border:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center;'> </td> <td width=52 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.35pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH1</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.4pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH2</p> </td> <td width=52 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.35pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH3</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.4pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH4</p> </td> <td width=52 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.35pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH5</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.4pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH6</p> </td> <td width=52 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.35pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH7</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.4pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH8</p> </td> <td width=76 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:2.0cm; background:#FDE9D9; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>Deviation</p> </td> </tr> <tr style='height:17.0pt'> <td width=62 style='border-left: 1.0pt solid windowtext; border-right: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:46.25pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>I_L,avg (A) </p> </td> <td width=52 style='width:39.35pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>19.5</p> </td> <td width=53 style='width:39.4pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>19.9</p> </td> <td width=52 style='width:39.35pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>20</p> </td> <td width=53 style='width:39.4pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>19.7</p> </td> <td width=52 style='width:39.35pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>44.9</p> </td> <td width=53 style='width:39.4pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>40.5</p> </td> <td width=52 style='width:39.35pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>38.7</p> </td> <td width=53 style='width:39.4pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>37.2</p> </td> <td width=76 style='width:2.0cm;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>±42%</p> </td> </tr> </table> </div> <br><BR> <p class=MsoCaption><a name="_Ref74231545">Table </a>4. Average Current of Each Phase with Modified CB Gain (Non-Symmetric PCB Layout)</p> <div> <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0 width=850 style='border-collapse:collapse;border:none'> <tr> <td width=62 style='width:46.25pt;border:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17pt; text-align: center;'> </td> <td width=52 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.35pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt;height:17pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH1</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.4pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt;height:17pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH2</p> </td> <td width=52 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.35pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt;height:17pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH3</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.4pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt;height:17pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH4</p> </td> <td width=52 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.35pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt;height:17pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH5</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.4pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt;height:17pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH6</p> </td> <td width=52 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.35pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt;height:17pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH7</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.4pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt;height:17pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH8</p> </td> <td width=76 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:2.0cm; background:#FDE9D9; padding:0cm 5.4pt 0cm 5.4pt;height:17pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>Deviation</p> </td> </tr> <tr style='height:17.0pt'> <td width=62 style='border-left: 1.0pt solid windowtext; border-right: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:46.25pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>I_L,avg (A)</p> </td> <td width=52 style='width:39.35pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>22.2</p> </td> <td width=53 style='width:39.4pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>22.8</p> </td> <td width=52 style='width:39.35pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>22.8</p> </td> <td width=53 style='width:39.4pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>22.8</p> </td> <td width=52 style='width:39.35pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>41.6</p> </td> <td width=53 style='width:39.4pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>37.4</p> </td> <td width=52 style='width:39.35pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>35.7</p> </td> <td width=53 style='width:39.4pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>34.3</p> </td> <td width=76 style='width:2.0cm;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>±33%</p> </td> </tr> </table> </div> <br><BR> <p class=MsoNormal><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image065_zh-tw.png" ><img width=640 height=377 id="圖片 10" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image065_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref74167599">Figure </a>14. Current Balance Result with Non-symmetric PCB Layout</p> <Br> <p class=Figure>For the second simulation case as shown in Figure 15, the PDN values are summarized in Table 5. By substituting the PDN values to equation (39), the ratio between V_{CS_max} and V_{CS_min} can be calculated as below :</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image066_zh-tw.jpg" ><img width=680 height=49 id="圖片 69" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image066_zh-tw.jpg" alt="Technical Document Image Preview"></a></p> <p class=Figure>From equation (41), the result shows the PDN deviation is within the design criterion. Therefore, the current balance result can be improved to an acceptable range by properly setting the current balance gain. If the design range of current balance gain is wider, the current balance performance may be much better. The average current of each phase in simulation result at I_OUT = 240A are listed in Table 6 and Table 7.</p> <br> <p class=MsoCaption><a name="_Ref74240136">Table </a>5. PDN Design Value of Symmetric PCB Layout</p> <div> <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0 width=850 style='width:637.5pt;border-collapse:collapse;border:none'> <tr style='height:17.0pt'> <td width=340 colspan=2 style='width:254.8pt;border:solid #009EB8 1.0pt; background:#009EB8;padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt'> <p class=MsoNormal style="text-align: center">Inductor DCR = 1mΩ</p> </td> </tr> <tr style='height:17.0pt'> <td width=170 style='border-left: 1.0pt solid #009EB8; border-right: 1.0pt solid #009EB8; border-bottom: 1.0pt solid #009EB8; width:127.4pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>R_PCB1 = 1.3mΩ</p> </td> <td width=170 style='width:127.4pt;border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>R_PCB5 = 0.75mΩ</p> </td> </tr> <tr style='height:17.0pt'> <td width=170 style='border-left: 1.0pt solid #009EB8; border-right: 1.0pt solid #009EB8; border-bottom: 1.0pt solid #009EB8; width:127.4pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>R_PCB2 = 1.25mΩ</p> </td> <td width=170 style='width:127.4pt;border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>R_PCB6 = 0.8mΩ</p> </td> </tr> <tr style='height:17.0pt'> <td width=170 style='border-left: 1.0pt solid #009EB8; border-right: 1.0pt solid #009EB8; border-bottom: 1.0pt solid #009EB8; width:127.4pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>R_PCB3 = 1.2mΩ</p> </td> <td width=170 style='width:127.4pt;border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>R_PCB7 = 0.85mΩ</p> </td> </tr> <tr style='height:17.0pt'> <td width=170 style='border-left: 1.0pt solid #009EB8; border-right: 1.0pt solid #009EB8; border-bottom: 1.0pt solid #009EB8; width:127.4pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>R_PCB4 = 1.15mΩ</p> </td> <td width=170 style='width:127.4pt;border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>R_PCB8 = 0.9mΩ</p> </td> </tr> </table> </div> <br><BR> <p class=MsoCaption><a name="_Ref74233973">Table </a>6. Average Current of Each Phase with Default CB Gain (Symmetric PCB Layout)</p> <div> <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0 width=850 style='border-collapse:collapse;border:none'> <tr style='height:17.0pt'> <td width=62 style='width:46.25pt;border:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center;'> </td> <td width=52 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.35pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH1</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.4pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH2</p> </td> <td width=52 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.35pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH3</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.4pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH4</p> </td> <td width=52 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.35pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH5</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.4pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH6</p> </td> <td width=52 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.35pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH7</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.4pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH8</p> </td> <td width=76 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:2.0cm; background:#FDE9D9; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>Deviation</p> </td> </tr> <tr style='height:17.0pt'> <td width=62 style='border-left: 1.0pt solid windowtext; border-right: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:46.25pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>I_L,avg (A)</p> </td> <td width=52 style='width:39.35pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>25.9</p> </td> <td width=53 style='width:39.4pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>26.5</p> </td> <td width=52 style='width:39.35pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>27.1</p> </td> <td width=53 style='width:39.4pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>27.6</p> </td> <td width=52 style='width:39.35pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>34.7</p> </td> <td width=53 style='width:39.4pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>33.8</p> </td> <td width=52 style='width:39.35pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>32.8</p> </td> <td width=53 style='width:39.4pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>32</p> </td> <td width=76 style='width:2.0cm;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>±15%</p> </td> </tr> </table> </div> <br><BR> <p class=MsoCaption><a name="_Ref74233979">Table </a>7. Average Current of Each Phase with Modified CB Gain (Symmetric PCB Layout)</p> <div> <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0 width=850 style='border-collapse:collapse;border:none'> <tr style='height:17.0pt'> <td width=62 style='width:46.25pt;border:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center;'> </td> <td width=52 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.35pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH1</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.4pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH2</p> </td> <td width=52 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.35pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH3</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.4pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH4</p> </td> <td width=52 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.35pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH5</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.4pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH6</p> </td> <td width=52 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.35pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH7</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.4pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH8</p> </td> <td width=76 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:2.0cm; background:#FDE9D9; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>Deviation</p> </td> </tr> <tr style='height:17.0pt'> <td width=62 style='border-left: 1.0pt solid windowtext; border-right: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:46.25pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>I_L,avg (A)</p> </td> <td width=52 style='width:39.35pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>29.9</p> </td> <td width=53 style='width:39.4pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>30.5</p> </td> <td width=52 style='width:39.35pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>31.1</p> </td> <td width=53 style='width:39.4pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>31.9</p> </td> <td width=52 style='width:39.35pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>30.4</p> </td> <td width=53 style='width:39.4pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>29.6</p> </td> <td width=52 style='width:39.35pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>28.7</p> </td> <td width=53 style='width:39.4pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>28</p> </td> <td width=76 style='width:2.0cm;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>±9%</p> </td> </tr> </table> </div> <br><BR> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image067_zh-tw.png" ><img width=650 id="圖片 11" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image067_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref74240055">Figure </a>15. Current Balance Result with Symmetric PCB Layout</p> <br> <h3>4.2 Practical Design Example of Type2 Common-N DCR Current Sensing (Good Layout vs. Bad Layout)</h3> <p class=MsoNormal>In this section, there are two practical examples of PCB layout for RT8848A with Type2 common-N DCR current sensing structure. Both of these two examples adopt the same current balance gain setup (default). The PCB trace impedance from inductor output node to GPU loading point are simulated and shown in Table 8 and Table 9. The thermal balance results of each rail are also measured and recorded in Table 8 and Table 9. The test conditions are V_IN = 12V, V_OUT = 0.8V, f_SW = 300kHz, I_OUT = 120A and T_A = 25°C. The layout comparison between these two examples are shown in Figure 16 for bad layout and Figure 17 for good layout. It should be noticed that only power stage (DrMOS + Power Inductor + Output Caps.) layout are presented to reduce the layout picture size. The controller is placed away from power stage to avoid noise couple. Besides, it can be observed that the one with good layout has very symmetric output trace routing from inductor output node to GPU loading point. The current flow route of each phase is designed not to overlap another phase’s current route. This can help to prevent R_PCB unbalance when there is output current on the PCB trace. On the other hand, the one with bad layout has relatively non-symmetric output trace routing from inductor output node to GPU loading point. It should be noticed that the GPU socket has been removed on EVB and the real GPU sensing point is as shown on layout. Besides, the current flow route of each phase also overlaps between each other. This makes R_PCB become much more unbalance during actual loading condition. Therefore, not only current is unbalance but also the thermal balance is much worse. In a result, the R_PCB layout routing has significant effect on current balance result for a common-N type DCR current sensing structure.</p> <br> <p class=MsoCaption>Table 8. PDN Design Value of Bad Layout and Thermal Balance Result</p> <div> <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0 width=850 style='border-collapse:collapse;border:none'> <tr style='height:17.0pt'> <td width=104 style='width:77.75pt;border:solid windowtext 1.0pt;padding: 0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center;'> </td> <td width=54 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:40.75pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH1</p> </td> <td width=54 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:40.75pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH2</p> </td> <td width=54 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:40.75pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH3</p> </td> <td width=54 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:40.75pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH4</p> </td> <td width=54 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:40.75pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH5</p> </td> <td width=54 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:40.75pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH6</p> </td> <td width=54 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:40.75pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH7</p> </td> <td width=54 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:40.75pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH8</p> </td> </tr> <tr style='height:17.0pt'> <td width=104 style='border-left: 1.0pt solid windowtext; border-right: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:77.75pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>R_PCB(mΩ)</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>0.8</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>0.79</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>0.87</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>0.97</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>1.11</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>1.26</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>1.41</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>1.58</p> </td> </tr> <tr style='height:1.0cm'> <td width=104 style='border-left: 1.0pt solid windowtext; border-right: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:77.75pt; padding:0cm 5.4pt 0cm 5.4pt; height:1.0cm; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>Case Temp. </p> <p class=MsoNormal>of DrMOS (°C)</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>100.2</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>86.4</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>70.3</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>57.9</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>52.8</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>46.9</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>43.7</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>42.2</p> </td> </tr> </table> </div> <br><BR> <p class=MsoCaption><a name="_Ref76393031">Table </a>9. PDN Design Value of Good Layout and Thermal Balance Result</p> <div> <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0 width=850 style='border-collapse:collapse;border:none'> <tr style='height:17.0pt'> <td width=104 style='width:77.75pt;border:solid windowtext 1.0pt;padding: 0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center;'> </td> <td width=54 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:40.75pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH1</p> </td> <td width=54 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:40.75pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH2</p> </td> <td width=54 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:40.75pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH3</p> </td> <td width=54 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:40.75pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH4</p> </td> <td width=54 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:40.75pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH5</p> </td> <td width=54 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:40.75pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH6</p> </td> <td width=54 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:40.75pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH7</p> </td> <td width=54 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:40.75pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH8</p> </td> </tr> <tr style='height:17.0pt'> <td width=104 style='border-left: 1.0pt solid windowtext; border-right: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:77.75pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>R_PCB(mΩ)</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>0.55</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>0.53</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>0.56</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>0.55</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>0.55</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>0.56</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>0.53</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>0.59</p> </td> </tr> <tr style='height:1.0cm'> <td width=104 style='border-left: 1.0pt solid windowtext; border-right: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:77.75pt; padding:0cm 5.4pt 0cm 5.4pt; height:1.0cm; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>Case Temp. </p> <p class=MsoNormal>of DrMOS (°C)</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>64.4</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>63.4</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>61.7</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>62.1</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>62</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>61.4</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>63.9</p> </td> <td width=54 style='width:40.75pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>63.4</p> </td> </tr> </table> </div> <br><BR> <p class=MsoNormal><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image068_zh-tw.png" ><img width=523 height=234 id="圖片 16" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image068_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref76392987">Figure </a>16. Power Stage Layout Diagram of RT8848A with Bad Layout</p> <br> <p class=MsoListParagraph><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image069_zh-tw.png" ><img width=305 height=321 id="圖片 15" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image069_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=Figure><a name="_Ref76392970">Figure </a>17. Power Stage Layout Diagram of RT8848A with Good Layout</p> <Br> <h3>4.3 Practical Design Example of Type2 &amp; Type3 Common-N DCR Current Sensing</h3> <p class=Figure>In this section, we will compare the current balance performance of RT8843A controller with Type2 and Type3 connection. The RT8843A is a 3 phase multi-phase synchronous Buck controller which is optimized for high performance graphic microprocessor and support Nvidia OVR3i+ specification. As shown in Figure 20(a), the RT8843A has three operating phases, and the current flows from right to left on the EVB board. The location of phase 3 is furthest away from VOUT loading point and the location of phase 1 is closest to VOUT loading point. It should be noticed that the GPU socket on EVB are disconnected, and the real GPU remoting point are as shown in Figure 20(b). Therefore, the PDN values increase gradually from phase 1 to phase 3. The experiment utilizes two different types of common-N DCR current sensing structure to compare the current balance performance. When RT8843A applies with Type2 connection as shown in Figure 18, the Rx, Cx, Rn and Cn values are designed according to equation (15) and equation (34) in previous chapters. On the other hand, when RT8843A applies with Type3 connection as shown in Figure 19, the Rx, Cx, Rm, Rn and Cn values are designed according to equation (23) and equation (34) in previous chapters. It should be noticed that the Rm value is equal to Rx for properly PCB effect cancellation and there are total 2 x 3 = 6 pcs additional Rm resistors in connection between each phase’s Cx and inductor output node. Moreover, the equivalent DCR value is reduced to 1/3 times due to Type3 connection. The test condition for both Type2 and Type3 connections are the same, VIN is set as 12V and the VOUT is 0.8V. The output load current is continuous 90A. After loading for more than 10 minutes, measuring the inductor current of each phase and case temperature of DrMOS as well. Due to RT8843A doesn’t support adjustable current balance gain, the experiments are executed with the fixed current balance gain. The test results for Type2 and Type3 are summarized in Table 10. It can be observed that the deviation of current for Type2 is around 24.7% and the deviation of current for Type3 is only 3.4%. From the test result, the Type3 performs outstanding current balance performance as compared to Type2. Although the current signal of Type3 has been degraded to 1/3 times, the RT8843A with Type3 can achieve better current balance than with Type2. It’s all credited to Type3 has good R_PCB cancellation result.</p> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image070_zh-tw.png" ><img width=500 src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image070_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=MsoCaption><a name="_Ref76410609">Figure </a>18. Simplified Application Circuit for RT8843A with Type2 DCR Current Sensing Network</p> <br> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image071_zh-tw.png" ><img width=500 src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image071_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=MsoCaption><a name="_Ref76410680">Figure </a>19. Simplified Application Circuit for RT8843A with Type3 DCR Current Sensing Network</p> <br> <p class=MsoCaption><a name="_Ref74252187">Table </a>10. Current and Thermal Balance Result of RT8843A</p> <div> <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0 width=850 style='width:637.5pt;border-collapse:collapse;border:none'> <tr style='height:17.0pt'> <td width=66 style='width:49.4pt;border:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center;'> </td> <td width=198 colspan=3 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:148.8pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>Current Result (A)</p> </td> <td width=198 colspan=3 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:148.85pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>Temperature Result (°C)</p> </td> </tr> <tr style='height:17.0pt'> <td width=66 style='border-left: 1.0pt solid windowtext; border-right: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:49.4pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> </td> <td width=66 style='width:49.6pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>PH1</p> </td> <td width=66 style='width:49.6pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>PH2</p> </td> <td width=66 style='width:49.6pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>PH3</p> </td> <td width=66 style='width:49.6pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>PH1</p> </td> <td width=66 style='width:49.6pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>PH2</p> </td> <td width=66 style='width:49.65pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>PH3</p> </td> </tr> <tr style='height:17.0pt'> <td width=66 style='border-left: 1.0pt solid windowtext; border-right: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:49.4pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>Type2</p> </td> <td width=66 style='width:49.6pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>33.9</p> </td> <td width=66 style='width:49.6pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>29.5</p> </td> <td width=66 style='width:49.6pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>26.5</p> </td> <td width=66 style='width:49.6pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>125.6</p> </td> <td width=66 style='width:49.6pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>101.2</p> </td> <td width=66 style='width:49.65pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>86.4</p> </td> </tr> <tr style='height:17.0pt'> <td width=66 style='border-left: 1.0pt solid windowtext; border-right: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:49.4pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>Type3</p> </td> <td width=66 style='width:49.6pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>30.4</p> </td> <td width=66 style='width:49.6pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>30.2</p> </td> <td width=66 style='width:49.6pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>29.4</p> </td> <td width=66 style='width:49.6pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>101.5</p> </td> <td width=66 style='width:49.6pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>100.8</p> </td> <td width=66 style='width:49.65pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>96.5</p> </td> </tr> </table> </div> <br><BR> <div class="tb-system"><table class=MsoTableGrid border=0 cellspacing=0 cellpadding=0 style='border-collapse:collapse;border:none'> <tr> <td width=340 valign=top style='width:254.85pt;padding:0cm 5.4pt 0cm 5.4pt'> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image072_zh-tw.png" ><img width=297 height=224 id="圖片 13" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image072_zh-tw.png" alt="Technical Document Image Preview"></a></p> </td> <td width=340 valign=top style='width:254.85pt;padding:0cm 5.4pt 0cm 5.4pt'> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image073_zh-tw.png" ><img width=358 height=223 src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image073_zh-tw.png" alt="Technical Document Image Preview"></a></p> </td> </tr> </table> </div> <p class=Figure><a name="_Ref74248754">Figure </a>20. Current Flow of RT8843A (a) EVB (b) Layout</p> <br> <h3>4.4 Practical Design Example of Remoting Type Common-N DCR Current Sensing</h3> <p class=Figure>In this section, a simulation design example with remoting type of common-N DCR current sensing is presented. In this example, the RT8848A with 8 phase operation is selected to apply with remoting connection. The PDN values are assumed to be as worse as shown in Table 2. Therefore, we need to add additional Rd resistor in parallel with Cx to compensate the R_PCB effect. First, due to phase 5 has the smallest R_PCB value, it will be the reference value to design the other phases’ Rd value. The final design values of Rd for each phase are calculated by equation (32) and equation (33) and summarized in Table 11. As shown in Figure 21, the inductor current of each phase are almost the same at different output load current conditions. Due to the R_PCB effect is cancelled by properly designing the Rd value, the correct amplitude and shape of inductor current can be sensed across Cx. Then, the RT8848A will control the PWM of each phase to balance the current according to feedback signal. However, in practical hardware implementation, the R_PCB value may be different at different load condition due to different current density on PCB trace. Therefore, the current balance result may be worse than simulation result if R_PCB values are not accurate. In a result, in order to achieve good current balance result and eliminate R_PCB effect, the final value may be necessary to be fine tuned according to practical current measurement. The inductor current of each phase can be estimated by measuring the differential voltage across power inductor with a voltage meter (such as DMM4050). It should be noticed that the measurement result is equal to inductor average current multiplies DCR value. Moreover, due to R_PCB has been considered into current sensing feedback, it would be hard to implement thermal compensation for the DCR parameters of each phase.</p> <br> <p class=MsoCaption><a name="_Ref74254581">Table </a>11. Design Value of Rd for R_PCB Cancellation</p> <div> <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0 width=850 style='border-collapse:collapse;border:none'> <tr style='height:17.0pt'> <td width=75 style='width:56.45pt;border:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center;'> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.85pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH1</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.85pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH2</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.9pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH3</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.85pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH4</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.85pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH5</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.9pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH6</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.85pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH7</p> </td> <td width=53 style='border-right: 1.0pt solid windowtext; border-top: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:39.9pt; background:#DAEEF3; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium;'> <p class=MsoNormal>PH8</p> </td> </tr> <tr style='height:17.0pt'> <td width=75 style='border-left: 1.0pt solid windowtext; border-right: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:56.45pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>R_PCB (m<span lang=EN-GB style='font-family:Symbol;color:black'>W</span>)</p> </td> <td width=53 style='width:39.85pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>1.441</p> </td> <td width=53 style='width:39.85pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>1.401</p> </td> <td width=53 style='width:39.9pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>1.399</p> </td> <td width=53 style='width:39.85pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>1.406</p> </td> <td width=53 style='width:39.85pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>0.269</p> </td> <td width=53 style='width:39.9pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>0.378</p> </td> <td width=53 style='width:39.85pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>0.426</p> </td> <td width=53 style='width:39.9pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>0.472</p> </td> </tr> <tr style='height:17.0pt'> <td width=75 style='border-left: 1.0pt solid windowtext; border-right: 1.0pt solid windowtext; border-bottom: 1.0pt solid windowtext; width:56.45pt; padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>Rd (kW)</p> </td> <td width=53 style='width:39.85pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>1.877</p> </td> <td width=53 style='width:39.85pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>1.943</p> </td> <td width=53 style='width:39.9pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>1.947</p> </td> <td width=53 style='width:39.85pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>1.935</p> </td> <td width=53 style='width:39.85pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>Open</p> </td> <td width=53 style='width:39.9pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>20.18</p> </td> <td width=53 style='width:39.85pt;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>14.01</p> </td> <td width=53 style='width:39.9pt;border-bottom: solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;padding:0cm 5.4pt 0cm 5.4pt; height:17.0pt; text-align: center; border-left-style: none; border-left-color: inherit; border-left-width: medium; border-top-style: none; border-top-color: inherit; border-top-width: medium;'> <p class=MsoNormal>10.84</p> </td> </tr> </table> </div> <Br><BR> <p class=Figure><a class="fancybox" href="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image074_zh-tw.png" ><img width=650 id="圖片 14" src="/content/dam/richtek-eds/resources/application-notes/an067/html-images-zh_tw/image074_zh-tw.png" alt="Technical Document Image Preview"></a></p> <p class=MsoCaption><a name="_Ref74323655">Figure </a>21. Current Balance Result with Remoting Cancellation</p> <br><br> <h2 id="__Bookmark__5">5. Conclusion</h2> <p class=bady>In this application note, total of four types of DCR current sensing circuit for common-N application are introduced. We have derived the PCB effect on each type of DCR current sensing method. </p> <p class=bady>For Type1 method, the PCB effect induces both DC offset and AC offset on current feedback signal. The AC offset distorts the inductor current shape and make controller unable to detect the original current signal. Besides, the DC offset makes average inductor current not proportional to DCR value. Both DC and AC offsets are severe problem to current balance control. It affects not only current balance result but also the protection functions such as OCP. Therefore, Type1 is not recommended for practical application. </p> <p class=bady>For Type2 method, the hardware connection is similar to Type1, but the Rn location is different. By changing the location of Rn, the AC offset, which is generated from PCB effect, can be filtered out by Rx and Cx low pass filter. However, the inductor current signal still has DC offset. The DC offset value is related to R_PCB value. The design guide and practical example are given in section 4-1. For some application with relatively symmetric layout, the R_PCB effect can be compensated by adjusting the current balance gain of controller. It should be noticed that the final performance of current balance depends on the design margin of current balance gain and deviation of R_PCB. </p> <p class=bady>On the other hand, for Type3 method, this method requires additional resistors to be connected with Cx and each phase’s inductor output node to compensate the PCB effect. From the practical example in section 4-3, the results perform the current balance with Type3 is much better than the result with Type2. It’s credited to Type3 has good R_PCB cancellation result. Nevertheless, there are two drawbacks for Type3, the first one is the additional components required to connect with each phase, and the second one is the attenuation of the DCR sense value, which may also reduce the accuracy of current signal. Generally speaking, the Type3 is more suitable for the application with less than 4 phase. </p> <p class=bady>Finally, for the remoting type method, the additional Rd in parallel with Cx capacitor can effectively cancel the PCB effect. The practical example, which is shown in section 4-4, shows the current balance result of RT8848A with remoting method. Although it seems the current balance is good in simulation result, the key point is the correct value of R_PCB. In order to achieve the good current balance performance, the design value of Rd may require some fine-tune processes. </p> <p class=bady>In a result, the design of current sensing with DCR common-N connection is relatively hard as compared to differential type of DCR current sensing in multi-phase applications. It requires more attention and efforts on PCB layout at the beginning of system design. Although there are many methods to compensate the PCB effect in practical application, there is still a bottleneck for each method. Starting with a good PCB layout is the shortest route to achieve good current balance in common-N type applications. Besides, for some applications which require high current sensing accuracy for current reporting of each phase, the differential DCR type might be a better choice than common-N DCR type. However, if common-N DCR type is selected, the user can choose a suitable method to design their application circuit based on the comparison table as shown in Table 12. </p> <p class=MsoCaption><a name="_Ref76377275">Table </a>12. Comparison Table of Different Connection Types for Common-N DCR Application</p> <div> <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0 width=850 style='width:637.5pt;border-collapse:collapse;border:none'> <tr style='height:17.0pt'> <td width=189 style='width:141.5pt;border:solid #009EB8 1.0pt;background: #009EB8;padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt'> <p class=bady style="text-align: center">DCR Circuit Type</p> </td> <td width=278 style='width:208.75pt;border:solid #009EB8 1.0pt;border-left: none;background:#009EB8;padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt'> <p class=bady style="text-align: center">Strength</p> </td> <td width=383 style='width:287.25pt;border:solid #009EB8 1.0pt;border-left: none;background:#009EB8;padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt'> <p class=bady style="text-align: center">Weakness</p> </td> </tr> <tr style='height:17.0pt'> <td width=189 style='width:141.5pt;border:solid #009EB8 1.0pt;border-top: none;padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt'> <p class=bady>Type1</p> <p class=bady>(Not recommended)</p> </td> <td width=278 style='width:208.75pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt'> <p class=bady>NA</p> </td> <td width=383 style='width:287.25pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:17.0pt'> <p class=bady>1. AC and DC offset</p> <p class=bady>2. Require current balance gain to compensate</p> </td> </tr> <tr style='height:1.0cm'> <td width=189 style='width:141.5pt;border:solid #009EB8 1.0pt;border-top: none;padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm'> <p class=bady>Type2</p> </td> <td width=278 style='width:208.75pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm'> <p class=bady>Less components</p> </td> <td width=383 style='width:287.25pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:1.0cm'> <p class=bady>1. DC offset</p> <p class=bady>2. Require current balance gain to compensate</p> </td> </tr> <tr style='height:51.0pt'> <td width=189 style='width:141.5pt;border:solid #009EB8 1.0pt;border-top: none;padding:0cm 5.4pt 0cm 5.4pt;height:51.0pt'> <p class=bady>Type3</p> </td> <td width=278 style='width:208.75pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:51.0pt'> <p class=bady>1. No DC offset</p> <p class=bady>2. Suitable for low phase count (&lt;4phase)</p> </td> <td width=383 style='width:287.25pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:51.0pt'> <p class=bady>1. Require additional N x (N-1) pcs Rm resistors</p> <p class=bady>2. Current sensing gain reduces to 1/N * DCR</p> <p class=bady>3. V_{cs,ofs_comp} becomes crucial if 1/N * DCR is too small.</p> </td> </tr> <tr style='height:39.7pt'> <td width=189 style='width:141.5pt;border:solid #009EB8 1.0pt;border-top: none;padding:0cm 5.4pt 0cm 5.4pt;height:39.7pt'> <p class=bady>Remoting Type</p> </td> <td width=278 style='width:208.75pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:39.7pt'> <p class=bady>No DC offset</p> </td> <td width=383 style='width:287.25pt;border-top:none;border-left:none; border-bottom:solid #009EB8 1.0pt;border-right:solid #009EB8 1.0pt; padding:0cm 5.4pt 0cm 5.4pt;height:39.7pt'> <p class=bady>1. Require additional Rd to compensate R_PCB</p> <p class=bady>2. Need to fine-tune Rd in practical application</p> <p class=bady>3. Hard to measure accurate R_PCB values </p> </td> </tr> </table> </div> <br><br> <h2 id="__Bookmark__6">6. Reference</h2> <p class=MsoNormal>[1] AN037, Comparison of DCR Current Sense Topologies. </p> <p class=MsoNormal>[2] AN026, DCR Temperature Compensation </p> <p class=MsoNormal>[3] RT8848A/B Datasheet</p> <p class=MsoNormal>[4] RT8843A Datasheet</p> <br><br><br> <table style="width: 637.5pt; border-collapse: collapse; border: medium none;" class="3-51" border="1" cellpadding="0" cellspacing="0"> <tbody> <tr style="height: 17pt;"> <td style="border-width: 1pt 1px 1px 1pt; border-style: solid; border-color: #009eb8; background-color: #009eb8; background-image: url(e); background-repeat: repeat; background-attachment: scroll; background-clip: border-box; background-origin: padding-box; background-size: auto auto; padding-right: 5pt; padding-left: 5pt; height: 17pt;" colspan="2"> <span style="color: #ffffff;">Next Steps</span> </td> </tr> <tr style="height: 17pt;"> <td style="border-width: 1pt 1px 1px 1pt; border-style: solid; border-color: #009eb8; background-color: #ffffff; background-image: url(e); background-repeat: repeat; background-attachment: scroll; background-clip: border-box; background-origin: padding-box; background-size: auto auto; padding-right: 5pt; padding-left: 5pt; height: 17pt;"> Richtek Newsletter </td> <td style="border-width: 1pt 1px 1px 1pt; border-style: solid; border-color: #009eb8; background-color: #ffffff; background-image: url(e); background-repeat: repeat; background-attachment: scroll; background-clip: border-box; background-origin: padding-box; background-size: auto auto; padding-right: 5pt; padding-left: 5pt; height: 17pt;"> <a class="link" href="http://www.richtek.com/My%20Richtek/Newsletters" target="_blank">Subscribe Richtek Newsletter</a> </td> </tr> <tr style="height: 17pt;"> <td style="border-width: 1pt 1px 1px 1pt; border-style: solid; border-color: #009eb8; background-color: #ffffff; background-image: url(e); background-repeat: repeat; background-attachment: scroll; background-clip: border-box; background-origin: padding-box; background-size: auto auto; padding-right: 5pt; padding-left: 5pt; height: 17pt;"> Download </td> <td style="border-width: 1pt 1px 1px 1pt; border-style: solid; border-color: #009eb8; background-color: #ffffff; background-image: url(e); background-repeat: repeat; background-attachment: scroll; background-clip: border-box; background-origin: padding-box; background-size: auto auto; padding-right: 5pt; padding-left: 5pt; height: 17pt;"> <a class="link" href="~/media/AN%20PDF/AN067_EN.ashx">Download PDF</a> </td> </tr> </tbody> </table> <BR> <BR> <BR>

false

---

i18n(article-attachment.related-product-list.title)

_ATTACHMENT_HIDDEN_FIELD_

related-products

---

_ATTACHMENT_HIDDEN_FIELD_

---

applicationNoteArticle