8
8
8
4
1rem
1rem
1rem
1rem
rt-dark-800
headline-3
false
true
basicInfoTitle
12
12
12
12
36
24
24
12
rt-dark-800
basicInfoSubtitle
basicInfoImageSwitcher
RT9468是適合可擕式應用的開關模式單節鋰離子/聚合物電池充電器,集成了同步 PWM 控制器、功率開關、輸入電流檢測、高精準度電壓調節和充電終止電路,充電電流通過整合感測電阻器調節,支援 USB On-The-Go (OTG) 應用。RT9468整合了易於使用的直接充電功能,只需驅動外部MOSFET,實現直接充電路徑,以及過壓保護、過流保護和watchdog功能。</br>RT9468以經過優化的控制策略進行不同模式下的充電速度調節,其模式包括預充模式及快充模式 (恆壓與恆流),所有關鍵的充電參數均可經過 I<sup>2</sup>C 介面進行程式設計。充電結束以後的電池電壓下將到預設的閾值以下時,RT9468會重啟充電流程以彌補其電能損失。當外部電源移除以後,RT9468自動進入睡眠模式以降低電池消耗。</br>它還具有欠壓保護、過壓保護、溫度調節和反向漏電保護等功能。</br>RT9468封裝為 WQFN-32L 4x4。</br>建議的接面溫度範圍為-40°C至125°C,而環境溫度範圍則為-40°C至85°C。
anchor
productDetailSection
i18n(anchor-tab.product-detail-section.title)
productDetailSectionAnchorTab
orderingInformationSection
i18n(anchor-tab.ordering-information-section.title)
orderingInformationSectionAnchorTab
technicalDocumentationSection
i18n(anchor-tab.technical-documentation-section.title)
technicalDocumentationSectionAnchorTab
designToolSection
i18n(anchor-tab.design-tool-section.title)
designToolSectionAnchorTab
applicationSection
i18n(anchor-tab.application-section.title)
applicationSectionAnchorTab
supportSection
i18n(anchor-tab.support-section.title)
supportSectionAnchorTab
24
24
24
24
i18n(tabs.product-detail.title)
productDetailTabs
i18n(tab-item.parameter-section.title)
parameterSection
parameterSectionTab
i18n(tab-item.package-size-pin-size-section.title)
packageSizePinsSizeSection
packageSizePinsSizeSectionTab
i18n(tab-item.product-feature-section.title)
productFeatureSection
productFeatureSectionTab
24
24
24
24
32
32
32
32
scrollable-table
parameterTable
normal-table
table-group
package-size-pins-size
packageSizePinsSizeTable
productFeature
<div class="spec-list"><ul class="lv1"><li>支援直充,具有過壓保護、過流保護和看門狗監控 </li><li>高效率的開關模式充電器 (所有資料於使用TOKO電感器DFE252012F時測得) <ul class="lv2"> <li></li><li>充電電流2A時,轉換效率為90.25% </li><li>充電電流3A時,轉換效率為88.86% </li><li>充電電流5A時,轉換效率為84.2% </li></ul> </li><li>工作頻率1.5MHz/0.75MHz可選,占空比可達95% </li><li>通過對BATFET的控制實現電源路徑管理 </li><li>支援高電壓 (9V/12V) 輸入,適配Pump Express 1.0/2.0/3.0充電器 </li><li>可對輸出端至電池之間的IR壓降進行補償 </li><li>採用多種電源容量匹配措施防範超載現象 <ul class="lv2"> <li></li><li>可通過I<sup>2</sup>C介面設定平均輸入電流限制閾值 </li><li>可通過ILIM端子設定輸入電流限制閾值 </li><li>輸入電流測量資料經過均勻化處理 </li></ul> </li><li>採用運輸模式可降低電池損耗 </li><li>自動完成充電任務,無需干預 </li><li>平均輸入電流調整範圍:0.1A至3.25A (級差50mA) </li><li>充電電流調整精準度:±7% </li><li>充電電壓調整精準度:±1% (0至85°C) </li><li>完善的保護功能 <ul class="lv2"> <li></li><li>自動調節電流實現溫度調節,過熱時自動關機保護 </li><li>輸入過壓保護 </li><li>適配器故障保護 </li><li>電池過壓保護 </li></ul> </li><li>通過ADC採集如下資訊:VBUS, VBAT, VSYS, REGN, TS_BAT, IBUS, IBAT, TEMP_JC, TS_BUS,VBATS, IBATS </li><li>需要與主機通訊時經INT發出資訊 </li></ul></div>
24
24
24
24
i18n(tabs.ordering-information.title)
orderingInformationTabs
i18n(tab-item.product-section.title)
productSection
productSectionTab
i18n(tab-item.evb-section.title)
evbSection
evbSectionTab
i18n(tab-item.ordering-detail-section.title)
orderingDetailSection
orderingDetailSectionTab
24
24
24
24
productImageSwitcher
normal-table
card-list
products
productTable
evbImageSwitcher
normal-table
card-list
evb
evbTable
orderingDetail
technical-documents
technicalDocumentMultipleTable
design-tools
designToolMultipleTable
32
56
56
56
rt-blue-800
i18n(text.application-title.text-content)
applicationTitle
withLine
24
24
24
24
<div class="spec-list"><ul class="lv1"><li>行動電話 </li><li>個人資訊設備 </li><li>平板電腦、行動電源 </li><li>可擕式儀器 </li></ul></div>
applicationContent
35
35
35
35
keywordList
56
56
56
56
rt-blue-800
i18n(text.support-card-title.text-content)
supportCardTitle
withLine
40
40
40
24
supportCards
i18n(support-card-item.technical-support.title)
i18n(support-card-item.technical-support.description)
i18n(support-card-item.technical-support.learn-more-text)
i18n(support-card-item.technical-support.url)
technicalSupportCard
i18n(support-card-item.ordering.title)
i18n(support-card-item.ordering.description)
i18n(support-card-item.ordering.learn-more-text)
i18n(support-card-item.ordering.url)
orderingSupportCard
i18n(support-card-item.sales.title)
i18n(support-card-item.sales.description)
i18n(support-card-item.sales.learn-more-text)
i18n(support-card-item.sales.url)
salesSupportCard
56
56
56
32