loading

The RT9511 is a fully integrated low cost solution with a single-cell Li-Ion battery charger and two high efficiency step-down DC/DC converters ideal for portable applications.
The Battery Charger is capable of being powered up from AC adapter and USB (Universal Serial Bus) port inputs which can automatically detect and select the AC adapter and the USB port as the power source for the charger. The Battery Charger enters sleep mode when both supplies are removed. The Battery Charger optimizes the charging task by using a control algorithm including preconditioning mode, fast charge mode and constant voltage mode. The charging task is terminated as the charge current drops below the preset threshold. The USB charge current can be selected from preset ratings100mA and 500mA, while the AC adapter charge current can be programmed up to 1A with an external resister. The internal thermal feedback circuitry regulates the die temperature to optimize the charge rate for all ambient temperatures. The Battery Charger features 18V and 7V maximum rating voltages for AC adapter and USB port inputs respectively. The other features are external programmed safety timer, under voltage protection, over voltage protection for AC adapter supply, battery temperature monitoring and charge status indicator.
The high-efficiency step-down DC/DC converter is capable of delivering 1A output current over a wide input voltage range from 2.5V to 5.5V, the step-down DC/DC converter is ideally suited for portable electronic devices that are powered from 1-cell Li-ion battery or from other power sources such as cellular phones, PDAs and hand-held devices. Two operating modes are available including : PWM/Low-Dropout autoswitch and shut-down modes. The Internal synchronous rectifier with low RDS(ON) dramatically reduces conduction loss at PWM mode. No external Schottky diode is required in practical application.
The RT9511 is available in a WQFN -24L 4x4 package.

Applications

  • MP3/MP4 Player
  • GPS
  • Digital Photo Frame
  • Hand held Device
Key Spec.
RT9511
Status Active
Vin (min) (V) 4.5
Vin (max) (V) 12
Battery Charge Voltage (max) (V) 4.2
Battery Charge Current (max) (A) 1
Status Indicator Yes
Charger Type Linear
Input Source AC Adapter;USB
Features Enable Input;OVP;UVP
Package Type WQFN4x4-24
Built-in Power MOSFETs Yes
Features
  • Battery Charger
      ♦ Automatic Input Supplies Selection
      ♦ 18V Maximum Rating for AC Adapter
      ♦ Integrated Selectable 100mA and 500mA USB      Charge Current
      ♦ Internal Integrated Power FETs 
      ♦ Charge Status Indicator 
      ♦ External Capacitor Programmable Safety Timer
      ♦ Under Voltage Protection
      ♦ Over Voltage Protection 
      ♦ Automatic Recharge Feature
      ♦ Battery Temperature Monitoring
      ♦ Thermal Feedback Optimizing Charge Rate
      ♦ Power Path Controller
  • Step-Down DC/DC Converter
      ♦ Adjustable Output from 0.6V to VIN
      ♦ 1A Output Current
      ♦ 95% Efficiency
      ♦ No Schottky Diode Required
      ♦ 1.5MHz Fixed-Frequency PWM Operation
  • Small 24-Lead WQFN Package
  • RoHS Compliant and Halogen Free
TOP