loading

Dual Channel PWM Controller for IMVP8 CPU Core Power Supply

RT3606BE

Update Alert Share

The RT3606BE is an IMVP8 compliant CPU power controller which includes two voltage rails : a 3/2/1 phase synchronous Buck controller, the CORE VR and a 2/1 phase synchronous Buck controller, the AXG VR. The RT3606BE adopts G-NAVPTM (Green Native AVP) which is Richtek's proprietary topology derived from finite DC gain of EA amplifier with current mode control, making it easy to set the droop to meet all Intel CPU requirements of AVP (Adaptive Voltage Positioning). Based on the G-NAVPTM topology, the RT3606BE also features a quick response mechanism for optimized AVP performance during load transient. The RT3606BE supports mode transition function with various operating states. A serial VID (SVID) interface is built in the RT3606BE to communicate with Intel IMVP8 compliant CPU. The RT3606BE supports VID on-the-fly function with three different slew rates : Fast, Slow and Decay. By utilizing the G-NAVPTM topology, the operating frequency of the RT3606BE varies with VID, load and input voltage to further enhance the efficiency even in CCM. Moreover, the G-NAVPTM with CCRCOT (Constant Current Ripple COT) technology provides superior output voltage ripple over the entire input/output range. The built-in high accuracy DAC converts the SVID code ranging from 0.25V to 1.52V with 5mV per step. The RT3606BE integrates a high accuracy ADC for platform setting functions, such as quick response trigger level or over-current level. Besides, the setting function also supports this two rails address exchange. The RT3606BE provides VR ready output signals. It also features complete fault protection functions including over-voltage (OV), negative voltage (NV), over-current (OC) and under-voltage lockout (UVLO). The RT3606BE is available in the WQFN-48L 6x6 small foot print package.

Applications

  • IMVP8 Intel Core Supply
  • Notebook/ Desktop Computer Multi-phase CPU Core Supply
  • AVP Step-Down Converter
Key Spec.
RT3606BE
Status Active
VID Table Support IMVP8
Number of Phases 2;3
Vcc (typ) (V) 5
Vin (min) (V) 10.8
Vin (max) (V) 13.2
Accuracy (Vout>=1V) (+/- %) 0.5
Freq (typ) (kHz) 400
Built-in DAC Generator Yes
Number of MOSFET Drivers 0
Features Diode Emulation Mode;Fast Transient Response;G-NAVP Control;OCP;OVP;Power Good
Package Type WQFN6x6-48
Features
  • Intel IMVP8 Serial VID Interface Compatible Power Management States
  • 3/2/1 Phase (CORE VR) + 2/1 Phase (AXG VR) PWM Controller
  • G-NAVPTM (Green Native Adaptive Voltage Positioning) Topology
  • 0.5% DAC Accuracy
  • Differential Remote Voltage Sensing
  • Built-in ADC for Platform Programming
  • Accurate Current Balance
  • System Thermal Compensated AVP
  • Diode Emulation Mode at Light Load Condition for Single Phase Operation
  • Fast Transient Response
  • VR Ready Indicator
  • Thermal Throttling
  • Current Monitor Output
  • OVP, OCP, NVP, UVLO
  • Slew Rate Setting/Address Flip Function
  • Rail Address Flexibility
  • DVID Enhancement
Datasheet
TitleLast UpdateShareDownload
Dual Channel PWM Controller for IMVP8 CPU Core Power Supply2016/04/07
Technical Documents
TitleLast UpdateShareDownload
Richtek Vcore Product Selection List for Intel and AMD platforms [May, 2017]2018/11/15
Introduction to Richtek VCORE Solutions2017/10/18
TOP